Another way of programming the roach is to go

(echo "?progdev filename" ; cat) | nc -q 1 roach-ip-or-name 7147

The protocol to speak to the roach is simple text, so you might not
need a supporting library to drive it, provided you are willing to
open a tcp socket and write/read text from it.

regards

marc


On Fri, Jul 7, 2017 at 8:58 AM, James Smith <[email protected]> wrote:
> Hello Anshu,
>
> Looping back into the mailing list so this is a reference for anyone else
> who encounters this.
>
> In order to use the casperfpga package with a ROACH 1 you need the
> following:
>
> bof file on the ROACH's filesystem, in the /boffiles directory. Either this
> must be on an SD card if you've booted from the SD card, or it must be in
> the appropriate place on the NFS share if you've booted from network. If
> your bof file is in whatever your current directory is, it will still not
> work.
> fpg file in the current directory, this must correspond to the bof file.
> They're generated together by the casper_xps tool.
>
>
> Steps are as follows:
>
> import casperfpga
> fpga = casperfpga.katcp_fpga.KatcpFpga(roachname) # port and timeout
> optional
> fpga.system_info["program_filename"] = boffile
> fpga.program()
> fpga.get_system_information(fpgfile)
>
> And Bob's your uncle. There you go. It's likely that your problem was the
> bof file not being accessible to the ROACH.
>
> Just a note, that if you try to program a ROACH and it fails, the tcpborph
> server often falls over. You may need to reboot the ROACH. To test this:
>
> ssh root@<roach_IP>
> ps aux | grep tcpborphserver
>
> Check if the output of that command has <defunct> anywhere in it. If so,
> reboot your ROACH:
> shutdown -r now
>
> before trying to program it again.
>
> Hope this helps,
> James
>
>
> On Fri, Jul 7, 2017 at 10:48 AM, Anshu Singh <[email protected]>
> wrote:
>>
>> Hi James,
>>
>> katchcp version: 0.3.5
>> I upgraded to the latest version (0.6). It is working now.
>> Now the fpga is connected, but I am not able to program it.
>>
>>
>> The bof file is generated using MATLAB 2013a simulink version. ISE version
>> is 14.7.
>>
>>
>> The error is:
>> KatcpRequestFail
>>
>> Details:
>>
>> In [1]: import casperfpga
>>
>> In [2]: boffile='lfpolv1_2048ch_2017_Jul_06_1811.bof'
>>
>> In [3]: fpga = casperfpga.katcp_fpga.KatcpFpga('100.100.100.1',7147,10)
>>
>> In [4]: fpga.is_connected()
>> Out[4]: True
>>
>> In [5]: fpga.system_info['program_filename'] = boffile
>>
>> In [6]: fpga.program()
>>
>> ---------------------------------------------------------------------------
>> KatcpRequestFail                          Traceback (most recent call
>> last)
>> <ipython-input-6-f0abab8923ae> in <module>()
>> ----> 1 fpga.program()
>>
>> /usr/local/lib/python2.7/dist-packages/casperfpga/katcp_fpga.pyc in
>> program(self, filename)
>>     326                     complete_okay = True
>>     327             if not complete_okay: # Modify to do an extra check
>> --> 328                 reply, _ = self.katcprequest(name='status',
>> request_timeout=1)
>>     329                 # Not sure whether 1 second is a good timeout here
>>     330                 if reply.arguments[0] == 'ok':
>>
>> /usr/local/lib/python2.7/dist-packages/casperfpga/katcp_fpga.pyc in
>> katcprequest(self, name, request_timeout, require_ok, request_args)
>>     161                     'Request %s on host %s failed.\n\t'
>>     162                     'Request: %s\n\tReply: %s' %
>> --> 163                     (request.name, self.host, request, reply))
>>     164             elif reply.arguments[0] == katcp.Message.INVALID:
>>     165                 raise KatcpRequestInvalid(
>>
>> KatcpRequestFail: Request status on host 100.100.100.1 failed.
>>     Request: ?status
>>     Reply: !status fail program
>>
>>
>>
>> What could be the issue?
>>
>>
>> On Fri, Jul 7, 2017 at 12:37 PM, James Smith <[email protected]> wrote:
>>>
>>> Hello Anshu,
>>>
>>> What version of katcp do you have installed? I have seen this issue when
>>> the katcp library isn't up-to-date.
>>>
>>> I think you can get this either from pip or directly from github.
>>>
>>> Regards,
>>> James
>>>
>>>
>>> On Fri, Jul 7, 2017 at 7:39 AM, Anshu Singh <[email protected]>
>>> wrote:
>>>>
>>>> Hello,
>>>>
>>>> While trying to link the CASPER ROACH1 board to PC, I am getting this
>>>> error:
>>>>
>>>> AttributeError: 'KatcpFpga' object has no attribute 'callback_request'
>>>>
>>>>
>>>> The steps followed are as such:
>>>>
>>>>
>>>> In [1]: import casperfpga
>>>>
>>>> In [2]: fpga=casperfpga.katcp_fpga.KatcpFpga('100.100.100.1',7147,10)
>>>>
>>>> ---------------------------------------------------------------------------
>>>> AttributeError                            Traceback (most recent call
>>>> last)
>>>> <ipython-input-2-26165eea9aca> in <module>()
>>>> ----> 1 fpga=casperfpga.katcp_fpga.KatcpFpga('100.100.100.1',7147,10)
>>>>
>>>> /usr/local/lib/python2.7/dist-packages/casperfpga/katcp_fpga.pyc in
>>>> __init__(self, host, port, timeout, connect)
>>>>      70     def __init__(self, host, port=7147, timeout=20.0,
>>>> connect=True):
>>>>      71         async_requester.AsyncRequester.__init__(self, host,
>>>> ---> 72
>>>> self.callback_request,
>>>>      73
>>>> max_requests=100)
>>>>      74         katcp.CallbackClient.__init__(self, host, port,
>>>>
>>>> AttributeError: 'KatcpFpga' object has no attribute 'callback_request'
>>>>
>>>>
>>>> I have tried with various versions of casperfpga from github but the
>>>> error remains the same.
>>>> What should be done in order to rectify this error?
>>>>
>>>>
>>>>
>>>> Thanks,
>>>> Anshu
>>>> Junior Research Fellow
>>>> (Int. M.tech-Ph.D Batch 2013)
>>>> Indian Institute of Astrophysics
>>>> Koromangala II Block
>>>> Bangalore-560034
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "[email protected]" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To post to this group, send email to [email protected].
>>>
>>>
>>
>>
>>
>> --
>> --------------------------
>> Anshu
>> Junior Research Fellow
>> (Int. M.tech-Ph.D Batch 2013)
>> Indian Institute of Astrophysics
>> Koromangala II Block
>> Bangalore-560034
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "[email protected]" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to