Hi Franco.

No, it does not work if you ignore these warnings.  It sort of works.
Which is worse, IMO...

You should dither your sampling rate until you find something thta works
and design the system to work with that.

John


On Tue, Sep 12, 2017 at 2:09 PM, Franco <[email protected]> wrote:

> Interesting, thanks for the info. Do you know if it is safe to operate the
> ADC outside does assigned constraints, assuming the model meets timing
> closure?
>
> Franco
>
>
> On 12/09/17 17:34, David MacMahon wrote:
>
>> Hi, Franco,
>>
>> I'm not extensively familiar with the inner workings of the AGC5G yellow
>> block, but I suspect the limitation is caused by the somewhat obscure
>> constraints imposed by the MMCM in the Virtex 6.  This limitation also
>> affects the ADC16 yellow block.  More details can be found here:
>>
>> https://casper.berkeley.edu/wiki/ADC16x250-8#ADC16_Sample_Ra
>> te_vs_Virtex-6_MMCM_Limitations
>>
>> Hope this helps,
>> Dave
>>
>> On Sep 12, 2017, at 14:37, Franco <[email protected]> wrote:
>>>
>>> Dear Casperites,
>>>
>>> Recently I've been testing adc5g block for different compilation
>>> frequency, I figured that the block can be compiled at [540, 960] U [1080,
>>> 2500] MHz, for every other frequency it gives you a "An optimum PLL
>>> solution is not available!" error. This restrictions come from the Matlab
>>> script 'xps_adc5g.m' that generates the block. The block does some
>>> computation I don't understand to to set the PLL parameters (or fails to
>>> do). Does someone has information about why this block has that particular
>>> behavior? I want to compile a model at 1000MHz, and I wonder if it is
>>> possible.
>>>
>>> Many Thanks,
>>>
>>> Franco Curotto
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "[email protected]" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To post to this group, send email to [email protected].
>>>
>>
> --
> You received this message because you are subscribed to the Google Groups "
> [email protected]" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
>

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to