Hi Gerry:

Yes. Just like Jack said, those updates are for SNAP 1.2.

I have not seen the schematic of SNAP 2. My guess is that if you want to
have HMCAD1520 ADCs on SNAP 2, some modifications on pin map, reference
clock and the software interface are required.

Best,

Tian Huang

On Thu, Sep 21, 2017 at 3:49 AM, Jack Hickish <[email protected]> wrote:

> Hi Gerry,
>
> This is SNAP1 (aka SNAP1 rev2, SNAP1v2, SNAP1.2). Cambridge had a board
> made with the 12-bit HMCAD1520 ADC populated in place of the "normal" 8-bit
> HMCAD1511 ADCs. Tian has done a huge amount of work to get this working,
> and improve/fix the original 8-bit code. There were even pull requests
> raised against the casper-astro repository -- take note, other developers!
> This will make it's way into the main repository, probably in a couple of
> weeks when I'm in Cambridge.
>
> Cheers
> Jack
>
> On Wed, 20 Sep 2017 at 11:14 Gerald Harp <[email protected]> wrote:
>
>> Dear Tian
>>
>> Thanks very much for this summary and your efforts. I assume you're
>> talking about SNAP revision 1.2?  Or could it be SNAP 2?
>>
>> Gerry
>>
>> On 9/5/2017 11:23 AM, ian wrote:
>>
>> Hi All:
>>
>> I've done the hardware and software design for 12-bit ADCs, which is
>> HMCAD1520 (alternative to HMCAD1511), on SNAP board.
>>
>> My fork of the hardware repo is here
>> <https://github.com/ianmalcolm/mlib_devel/commit/bf039e82b7f90081dcb515ebedb4e877274f53ac>
>> .
>> My fork of the software repo is here
>> <https://github.com/ianmalcolm/casperfpga/commit/dd77442ce715c62f547b382a76860c4c2c02a58f>
>> .
>>
>> Tests for it's 8-bit mode have been carried out by organisers and
>> attendants of the tutorial of the CASPER 2017 workshop. Thank you very much!
>> I have done the test for it's 12-bit mode with a Simulink SLX model that
>> does not include an F engine or an FX engine.
>> HMCAD1520 supports 14-bit mode as well. I am still working on it.
>>
>> This yellow block mainly involves snap_adc.py, adc16_interface
>> <https://github.com/ianmalcolm/mlib_devel/tree/high_resolution_adc/jasper_library/hdl_sources/adc16_interface>,
>> wb_adc16_controller
>> <https://github.com/ianmalcolm/mlib_devel/tree/high_resolution_adc/jasper_library/hdl_sources/wb_adc16_controller>,
>> wb_bram
>> <https://github.com/ianmalcolm/mlib_devel/tree/high_resolution_adc/jasper_library/hdl_sources/wb_bram>,
>> and some peripherals.
>>
>> The image below shows the Simulink dialog for the snap_adc yellow block
>> parameter setting. For simplification purpose, the output bitwidth of the
>> snap_adc
>> <https://github.com/ianmalcolm/mlib_devel/blob/high_resolution_adc/jasper_library/yellow_blocks/snap_adc.py>
>> yellow block is always an integral multiples of 8 bits. For example, when
>> you choose resolution=8-bit, the output bitwidth is 8 bits. When you choose
>> resolution=12-bit, the output bitwidth is 16 bits.
>>
>>
>>
>> The number of inputs per SNAP is subjected to the the setting of Sample
>> rate. For guideline on setting the Sample rate, click the help button and
>> you will have:
>>
>>
>> ​
>> The software control consists of wishbonedevice.py
>> <https://github.com/ianmalcolm/casperfpga/blob/ian_adc16_devel/src/wishbonedevice.py>,
>> synth.py
>> <https://github.com/ianmalcolm/casperfpga/blob/ian_adc16_devel/src/synth.py>,
>> clockswitch.py
>> <https://github.com/ianmalcolm/casperfpga/blob/ian_adc16_devel/src/clockswitch.py>,
>> adc.py
>> <https://github.com/ianmalcolm/casperfpga/blob/ian_adc16_devel/src/adc.py>,
>> snapadc.py
>> <https://github.com/ianmalcolm/casperfpga/blob/ian_adc16_devel/src/snapadc.py>.
>> Here is a brief demonstration of the use of the software.
>>
>> class SNAPADC(object):
>>
>>
>>>     def __init__(self, interface, ADC='HMCAD1511', defaultDelayTap=0)
>>
>>         """ SNAPADC initialises/controls ADC related staffs, synchronises
>>> the
>>>
>>         data lanes of all ADCs on a SNAP board.
>>>         interface is an instance of casperfpga.CasperFpga (or an instance
>>>         of corr.katcp_wrapper.FpgaClient given a change on "word_offset"
>>
>>         to "offset" in wishbonedevice.py)
>>>         The default reference frequency in this lib is 10MHz. If you are
>>> using
>>>         a different one, say 50MHz, you may pass the SNAPADC instance
>>> with a
>>>         customized instance of frequency synthesizer, like this:
>>>
>>
>>
>>         mysnapadc = snapadc.SNAPADC(casperfpga)
>>>
>>         mysnapadc.lmx = synth.LMX2581(casperfpga,'lmx_ctrl',50)
>>
>>
>>
>>         Example of using this class:
>>>         ...
>>>         mysnapadc = SNAPADC(casperfpga)         # Make an instance
>>>         mysnapadc.init(800,2,8)                         # Sampling
>>> frequency 400MHz,
>>
>>                                                                         #
>>> two channel mode,
>>
>>                                                                         #
>>> 8-bit mode
>>
>>         mysnapadc.adc.selectInput([2,2,3,3])    # Select the 2nd and the
>>> 3rd
>>>
>>> # input for each ADC
>>
>>
>>
>>         # Till now the ADCs are ready for spectrometer or other
>>> applications.
>>>         # If you want to see the raw data (128 continuous samples) out
>>> of the
>>>         # ADCs, do this:
>>>
>>
>>
>>         mysnapadc.snapshot()                            # Take a snapshot
>>
>>         data = mysnapadc.readRAM(0)             # Read the snapshot of the
>>>
>>> # 1st ADC
>>
>>         data = mysnapadc.interleave(data,2)     # Reshape the data to
>>>
>>> # two columns (channels)
>>
>>         """
>>
>>
>>
>>
>> The 12-bit mode is ready, I also made a pull request. But there are some
>> problems when I applied the 12-bit mode to tutorials_devel/vivado/snap/
>> tut_corr
>> <https://github.com/casper-astro/tutorials_devel/commit/55747cd737b1f7ab1c5ce06da58ad8e1f9f77f3c>.
>> I am going to start another thread for the discussion.
>>
>> Best,
>>
>> Tian Huang
>> Research Associate
>> Battcock Centre for Experimental Astrophysics
>> Cavendish Laboratory
>> University of Cambridge
>> --
>> You received this message because you are subscribed to the Google Groups
>> "[email protected]" <[email protected]> group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To post to this group, send email to [email protected].
>>
>>
>> --
>> Gerald R. Harp, PhD
>> Director, SETI Research
>> SETI Institute
>> Mountain View, CA, USA
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "[email protected]" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To post to this group, send email to [email protected].
>>
> --
> You received this message because you are subscribed to the Google Groups "
> [email protected]" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
>

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to