Dear Gary and Neal,

I have similar requirements for non-radioastronomy passive mm-wave imaging 
applications, which may lie close to those of Lockheed Martin. I did find it 
difficult to adapt CASPER hardware as it has requirements not entirely aligned 
with these non-classic radioastronomy applications, ie it requires ~1 GHz 
bandwidth on hundreds of receiver channels. However, I watch this space in case 
capabilities start to emerge here where I could collaborate with community for 
spin out applications in pmmw imaging where powerful cross-correlators are 
required.

Many thanks,
Neil

From: Gary, Dale E. [mailto:[email protected]]
Sent: 24 December 2018 16:48
To: casper list
Cc: Neal Hurlburt
Subject: [casper] CASPER design question

Hi Casperites,

I received an inquiry from Neal Hurlburt, from Lockheed Martin (Palo Alto), who 
wants to look into the possibility of using CASPER hardware and tools to design 
a prototype system for interferometry of optical signals.  So far the 
specifications are quite fluid (see message below)--they would like a 500 MHz 
bandwidth, but would accept as low as 50 MHz.  However, he is looking for 
60-100 inputs, so I guess he is driven to the lower end of this bandwidth 
range.  Neal is not an engineer, but he can relay some suggestions from this 
list to engineering support at Lockheed.  If anyone has some suggestions for 
Neal, especially any projects of a similar nature, he would be delighted to 
hear from you.  I added his name to the cc list.

Many thanks,
Dale

Hi Dale,
Thanks for the info on your experience with CASPER. At a minimum, we are 
looking for a system that can digitize and correlate about 60 elements at 50 to 
500Mhz each. It sounds like CASPER is a good starting point. Who do you suggest 
we talk to at Berkeley?

Thanks,
Neal

————————
Neal Hurlburt
Manager, Space Science & Software
Space Science & Instrumentation
Lockheed Martin ATC
650-354-5504
[email protected]<mailto:[email protected]>
--
You received this message because you are subscribed to the Google Groups 
"[email protected]<mailto:[email protected]>" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
[email protected]<mailto:[email protected]>.
To post to this group, send email to 
[email protected]<mailto:[email protected]>.
"Before acting on this email or opening any attachments you should read the 
Manchester Metropolitan University email disclaimer available on its website 
http://www.mmu.ac.uk/emaildisclaimer "

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to