Ace. Glad you got sorted.

Jack

On Tue, 19 Feb 2019 at 09:43, Brad Kahn <[email protected]> wrote:

>
> *******************
> ***   SOLVED    ***
> *******************
>
> Hi jack,
>
> Thanks for all the troubleshooting tips. Upon further investigation, we
> noticed that the RPi was displaying under-voltage errors during bootup as
> well as during the initialization of the ADCs (causing the RPi to
> completely reboot).
>
> This was resolved by changing our 12VDC power supply and we successfully
> ran tutorial 3 :)
>
>
> Kind Regards,
> Brad
>
> On Sunday, 17 February 2019 12:38:35 UTC+4, jackhickish wrote:
>>
>> Hi Brad,
>>
>>
>>
>> On Fri, 15 Feb 2019 at 10:32, Brad Kahn <[email protected]> wrote:
>>
>>> Hi All,
>>>
>>> New to the Casper toolflow and hardware so please bear with us.
>>> We are trying to get up and running with the SNAP board by going through
>>> the tutorials from the 2018 workshop
>>> <https://github.com/casper-astro/tutorials_devel/tree/workshop2018>.
>>> We can compile and run tutorial 1 successfully, indicating that the
>>> toolflow and software versions are okay (hopefully).
>>>
>>
>> Excellent -- that is no small feat!
>>
>>
>>>
>>> Unfortunately, we are hitting a problem for* Tutorial 3 (Wideband
>>> Spectrometer)*
>>> After supplying a 10Mhz ref at 8dBm, we power up the snap and try to run
>>> the Python script with the precompiled .fpg file
>>> <https://github.com/casper-astro/tutorials_devel/tree/workshop2018/vivado/snap/tut_spec>
>>> :
>>>
>>> python snap_tut_spec.py '192.168.0.2' -b snap_tut_spec.fpg
>>>
>>>
>>> We hit an error when the script attempts:
>>>
>>> adc.init(samplingRate=sample_rate, numChannel=1, resolution=8)
>>>
>>> During this function call, we notice that the *Ethernet connection
>>> between the RPi and PC drops for a few seconds* and then we get this
>>> error (extended error message at the end):
>>>
>>> KatcpRequestFail: Request write on host 192.168.0.2 failed.
>>>     Request: ?write adc16_controller 0 \0\0
>>>     Reply: !write fail
>>>
>>> We tried extending the timeout period but this doesn't seem to help.
>>>
>>> We first tried using casperfpga libraries from casper-astro github
>>> (pointed to from the casper-astro/tutorials_devel
>>> <https://github.com/casper-astro/tutorials_devel/tree/workshop2018>)
>>> We then tried using  casperfpga libraries from ska-sa github (master
>>> <https://github.com/ska-sa/casperfpga>), but got the same errors.
>>> *which casperfpga should we be using?*
>>>
>>>
>> For the tutorials, you should definitely be using the casperfpga linked
>> by casper-astro/tutorials_devel which is [should be] the version we used at
>> the workshop. Note that this is currently commit 658d312
>> <https://github.com/casper-astro/casperfpga/tree/658d312e96bfe5ce05699c7290a569e64800da35>,
>> not the tip of the master branch. If this doesn't work for some reason, we
>> should fix the submodule reference.
>>
>>
>>> We also tried compiling the given snap_tut_spec.slx but still get the
>>> same errors when adc.init() is invoked.
>>>
>>> Right now, we cannot isolate the problem. We are not sure whether it's
>>> coming from the Linux PC, the RPi or the snap board running
>>> snap_tut_spec.fpg. But the errors indicate some sort of *katcp problem
>>> when reading/writing to adc chips*.
>>>
>>
>> Some questions which may help figure out what's going on --
>> What length of cable have you connected the RPi to the SNAP with? For a
>> Pi3, A cable as short as possible is probably a good idea. I don't think
>> this is your problem, because you can program the board fine.
>> How are you powering your SNAP -- what is the current limit? Once the
>> 10MHz reference synthesizer is configured, the power consumption of the
>> board will rapidly increase as the ADC/FPGA start clocking. I'm not sure
>> how much power the spectrometer tutorial uses, but it's probably between
>> 1.5 and 2A @ 12V.
>> After a crash, can you immediately reconnect to the Pi? (i.e., is
>> something so catastrophic happening that the Pi is rebooting?)
>> Does the "adc16_controller" register show up when you do a manual listdev
>> using casperfpga? I think it should because I can see it in the fpg file.
>> Can you manually read this register ok?
>>
>> The fact that you get further in the initialization procedure when you
>> have a legitimate 10MHz reference is encouraging. That suggests to me that
>> at least the clock is probably getting configured OK.
>>
>> Cheers
>> Jack
>>
>>
>>> Any suggestions will be great!
>>>
>>> HARDWARE:
>>>
>>>    - SNAP ver2.1.1
>>>    - Raspberry Pi 3 model B
>>>    - Laptop
>>>
>>> SOFTWARE:
>>>
>>>    - Ubuntu 16.04 xenial 64bit
>>>    - Raspberry Pi 3 image from
>>>    
>>> https://casper.ssl.berkeley.edu/wiki/SNAP_Bringup#Configuring_a_SNAP_Raspberry_Pi
>>>    - https://github.com/casper-astro/tutorials_devel/tree/workshop2018
>>>    - https://github.com/casper-astro/casperfpga (commit* ee9c43f*)
>>>    - also tried https://github.com/ska-sa/casperfpga (commit * 284a4ba*)
>>>
>>> ERROR MESSAGES:
>>>
>>> brad (workshop2018 *) tut_spec $ python snap_tut_spec.py '192.168.0.2'
>>> -b snap_tut_spec.fpg
>>> Connecting to server 192.168.0.2 on port 7147...  ok
>>>
>>> ------------------------
>>> Programming FPGA with snap_tut_spec.fpg... done
>>> Attempting to initialize ADC chips...
>>> attempt number 0 *<-- added print statement to script here*
>>> Traceback (most recent call last):
>>>   File "snap_tut_spec.py", line 109, in <module>
>>>     if adc.init(samplingRate=800, numChannel=1, resolution=8) == 0:
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/snapadc.py", line 139,
>>> in init
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/adc.py", line 147, in
>>> init
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/adc.py", line 398, in
>>> reset
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/adc.py", line 180, in
>>> write
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/adc.py", line 173, in
>>> _wordCtrl
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/adc.py", line 163, in
>>> _bitCtrl
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/wishbonedevice.py", line
>>> 8, in _write
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/casperfpga.py", line
>>> 404, in write_int
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/casperfpga.py", line
>>> 151, in blindwrite
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/transport_katcp.py",
>>> line 290, in blindwrite
>>>   File "build/bdist.linux-x86_64/egg/casperfpga/transport_katcp.py",
>>> line 175, in katcprequest
>>> casperfpga.transport_katcp.KatcpRequestFail: Request write on host
>>> 192.168.0.2 failed.
>>>     Request: ?write adc16_controller 0 \0\0
>>>     Reply: !write fail
>>> Request\_write\_timed\_out\_after\_10.005977\_seconds.
>>>
>>>
>>> *Running script without clock source*
>>>
>>> brad (workshop2018 *) tut_spec $ python snap_tut_spec.py '192.168.0.2'
>>> -b snap_tut_spec.fpg
>>> Connecting to server 192.168.0.2 on port 7147...  ok
>>>
>>> ------------------------
>>> Programming FPGA with snap_tut_spec.fpg... done
>>> Attempting to initialize ADC chips...
>>> attempt number 0
>>> ERROR:root:LMX2581 not locked
>>> attempt number 1
>>> ERROR:root:LMX2581 not locked
>>> attempt number 2
>>> ERROR:root:LMX2581 not locked
>>> done (took 3 attempts)
>>> Failed to calibrate after 3 attempts
>>> Traceback (most recent call last):
>>>   File "snap_tut_spec.py", line 115, in <module>
>>>     exit_clean()
>>> NameError: name 'exit_clean' is not defined
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "[email protected]" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To post to this group, send email to [email protected].
>>>
>> --
> You received this message because you are subscribed to the Google Groups "
> [email protected]" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
>

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to