Hi Alex and SKARAB casperites,

1) Firstly, I see some references to the old wiki in these threads. I
suggest go to https://casper.berkeley.edu and then click on "Hardware" (
https://casper.berkeley.edu/index.php/hardware/). Once you do that click on
https://github.com/casper-astro/casper-hardware#casper-hardware and then
select "SKARAB". Please note if you use the old wiki then you will have
incomplete information. There is a lot of new information on the github
wiki concerning SKARAB. This will eventually/probably move to to the
ReadtheDocs platform that Brian Bradford and Jack Hickish has been driving.
Now to upset the apple cart, the information in the SKARAB github wiki
needs to be updated - the SKARAB toolflow and BSP is now using Vivado
2018.2 and the toolflow models have been ported to Matlab R2018a with
service pack 6. We have also migrated to Ubuntu 16.04LTS. The latest BSP is
now version 2.8. This github SKARAB wiki will be updated shortly = watch
this space!

2) Thanks Wes, the latest images
https://github.com/ska-sa/skarab_bsp_images (master). There is a difference
with the BSP now. It is now generated from the toolflow models and we have
moved away from the Peralex directory format. The latest BSP is generated
from the skarab_fgbe.slx model (github:
https://github.com/ska-sa/mlib_devel/tree/devel/jasper_library/test_models/).
The BSP is time stamped as well, which makes it easier to track. There are
two images to load - multiboot and golden image. Please Refer to the SKARAB
wiki for explanations of the multiboot and golden images. The current BSP
images are named skarab_fgbe_2019-03-04_1220_multiboot.hex,
skarab_fgbe_2019-03-04_1312_golden.hex. Wesley has already referenced
casperfpga below, so I will just explain how to configure the images with
casperfpga.

I assume you can ping the boards and have installed casperfpga. Open a
terminal and start an ipython session:

In [1] import casperfpga
In [2] fpga = casperfpga.Casperfpga('10.0.0.75')
In [3]
fpga.transport.virtex_flash_reconfig(filename='skarab_fgbe_2019-03-04_1220_multiboot.hex',
flash_address=50331648) - for multiboot image
Out [3]: True
In [4]
fpga.transport.virtex_flash_reconfig(filename='skarab_fgbe_2019-03-04_1312_golden.hex',
flash_address=0x0) - for golden image
Out [4]: True
<power the board down and then up>
In[5] fpga.transport.get_skarab_version_info()
Out[5]:
{'golden_image': False,
 'microblaze_hardware_version': '2.7',
 'microblaze_software_version': '3.11.0',
 'multiboot_image': True,
 'spartan_firmware_version': '1.6',
 'toolflow_image': False,
 'virtex7_firmware_version': '2.8'}

If you read the above versions after power up then it has successfully
configured the flash with the new multiboot image. Please note that the
current BSP has no ADC board or HMC board firmware. It still contains the
1GbE and single port 40GbE. The documentation will be updated to reflect
this in due course.

3) SKARAB ADCs. There are two SKARAB ADC Mezzanine Cards available - one
with DDC enabled and one with DDC bypassed.There are currently two ADC test
models: test_skarab_adc.slx (DDC enabled) and test_skarab_adc_by.slx (DDC
bypassed). You can find out more about these ADC Mezzanine Cards by looking
at the SKARAB hardware wiki or speaking to Peralex i.e. Alex Bassios or
Clifford van Dyk. These models work with the python and matlab scripts in
the "/test_models/scripts/test_skarab_adc" folder. The script basically
initialises the ADC and captures some samples. The Matlab file allows you
to plot the captured files. We are in the process of adding this to
casperfpga and Amish Patel can tell you more on how that is going. I
believe we are close though. Once complete then we will release that.

Feel free to ask any questions.


Kind regards,

Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel:  (+27) 215067300
email: [email protected]



On Thu, Mar 7, 2019 at 1:41 PM Wesley New <[email protected]> wrote:

> Hi Alex, I have CCed the mailing list so that this information will be out
> in the wild.
>
> Firstly, here is a link to the SKARAB page on the wiki. It has all the
> resources that one would need for the SKARABs.
> https://casper.ssl.berkeley.edu/wiki/SKARAB
>
> To use the CASPER tools, the BSP would need to be upgraded. The latest
> images can be found here. https://github.com/ska-sa/skarab_bsp_images
> Adam will respond with how to upload the new BSP images.
>
> There is are 2 test designs in mlib_devel for the SKARAB ADC at
> https://github.com/ska-sa/mlib_devel/tree/devel/jasper_library/test_models
> .
>
> The Linux control software is built into CASPERFPGA and is in the devel
> branch of the SKA repository here:
> https://github.com/ska-sa/casperfpga/tree/devel There should be a
> function to initialise the ADC. Amish should be able to elaborate here. The
> toolflow will generate the "full" hdl design that can be opened in Vivado
> and perused at ones leisure.
>
> Please let me know if there are any other questions.
>
> Wesley New
> South African SKA Project
> +2721 506 7300
> www.ska.ac.za
>
>
>
>
> On Thu, Mar 7, 2019 at 12:06 PM Alex Bassios <[email protected]> wrote:
>
>> Hi Adam/Jason/Wesley
>>
>>
>>
>> Andrea Melis from INAF has bought a SKARAB and ADC.
>>
>>
>>
>> See below.
>>
>>
>>
>> It is probably best that Andrea Melis and INAF stay inside the CASPER
>> tool flow.  Is there something SARAO can send them?  Maybe this should be
>> done via the CASPER mail list?
>>
>>
>>
>> What can you suggest?
>>
>>
>>
>> Alex
>>
>> 021-7107442
>>
>>
>>
>> *From:* David Moschella Cyntony <[email protected]>
>> *Sent:* Wednesday, 06 March 2019 7:25 PM
>> *To:* Alex Bassios <[email protected]>
>> *Cc:* Clifford van Dyk <[email protected]>
>> *Subject:* BSP request from INAF
>>
>>
>>
>> Hello,
>>
>>
>>
>> As you saw last week, Andrea Melis completed the SKARAB ATP and has
>> accepted the SKARAB.
>>
>>
>>
>> He requested today that we provide the BSP, hopefully with a full VHDL
>> template.
>>
>> He also requested "any personality already compiled with its
>> Linux control software (for example, SDR applications)”
>>
>>
>>
>> Best Regards,
>>
>>
>>
>> *David A Moschella* | *Founder and President*
>>
>> *Cyntony Corporation *|* Lexington, MA, USA* |* www.cyntony.com
>> <http://www.cyntony.com/>  *
>>
>> M: 617-407-0753 | O: 781-430-0675 |  [email protected]
>>
>>
>>
>> Cyntony boosts system integrators with customer attuned℠ provision of
>> high-value antenna and electronics products
>>
>> *VLF thru X band  **| DF, CREW, SIGINT, COMM, HPC  | Mounted,
>> Dismounted, Fixed, Portable*
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ------------------------------
>> Disclaimer: http://www.peralex.com/disclaimer.html
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].

Reply via email to