Thank you for your response, I have to use Ubuntu 14.04. Kind regards,
Jael R On Thursday, December 12, 2019 at 8:43:05 PM UTC-6, Danny Price wrote: > > Hi Jael, > > Short answer: No. Don't do it! > > For compiling, most important for ROACH2 is that you will need to use the > older Xilinx ISE 14.x -- you *cannot* use Xilinx Vivado to target the > Virtex 6 FPGA. > > You can probably get away with Ubuntu 18.04, but I doubt the newer > versions of MATLAB will work with ISE -- 2012b is the last officially > supported version (if I recall correctly -- maybe 2013b). > > If you're using your workstation for other things, and need Ubuntu 18, you > could consider putting your ROACH2 toolflow install inside a virtual > machine. > > Good luck! > Danny > > > On 13 December 2019 at 12:34:06 pm, Jael Nora Rojas Miguel ( > jael...@pucp.edu.pe <javascript:>) wrote: > > Could I use Roach 2 with Ubuntu 18.4 and Matlab 18 ? Thanks a lot for > your help. > -- > You received this message because you are subscribed to the Google Groups " > cas...@lists.berkeley.edu <javascript:>" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to cas...@lists.berkeley.edu <javascript:>. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/9c3a508e-8d01-4670-a235-06752ae41520%40lists.berkeley.edu > > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/9c3a508e-8d01-4670-a235-06752ae41520%40lists.berkeley.edu?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/72e5d53a-81cd-415e-8ef4-acbb539551b3%40lists.berkeley.edu.
