Hi Xavier, Okay, great! I am glad you sorted it out.
Kind regards, Adam Isaacson South African Radio Astronomy Observatory (SARAO) Hardware Manager Cell: (+27) 825639602 Tel: (+27) 215067300 email: aisaac...@ska.ac.za On Wed, Aug 5, 2020 at 8:13 PM Xavier Bosch <bruixa.aburrid...@gmail.com> wrote: > Hi Adam, > > It was a software version problem. I installed the Matlab 2018a version > and now it works. > Summary: > > - Ubuntu 16.04.6 LTS, Xilinx 2018.1 and Matlab 2019a it does not work. > - Ubuntu 16.04.6 LTS, Xilinx 2018.1 and Matlab 2018a it does work. > > > Thank you for your response! > Best, > XB > > On Tue, Aug 4, 2020 at 10:27 AM Adam Isaacson <aisaac...@ska.ac.za> wrote: > >> Hi Xavier, >> >> What hardware platform are you using? The latest toolflow has been tested >> with Ubuntu 16.04LTS, Matlab R2018a (update pack 6) and Vivado 2019.1.1. >> This is supported for SNAP, SKARAB and the Red Pitaya. ROACH2 still >> supports the old tool flow, which uses ISE 14.7 and something like Matlab >> R2012b. >> >> I am suspecting that one of the sysgen parameters in Vivado 2018.1 is >> different to Vivado 2019.1.1. Some of the Matlab/Simulink mask init scripts >> would have been updated to support the sysgen in Vivado 2019.1.1. This is >> likely part of your issue. Is it not possible for you to use the versions >> specified in the toolflow ReadtheDocs first before trying different >> versions? >> >> Good luck! >> >> Kind regards, >> >> Adam Isaacson >> South African Radio Astronomy Observatory (SARAO) >> Hardware Manager >> Cell: (+27) 825639602 >> Tel: (+27) 215067300 >> email: aisaac...@ska.ac.za >> >> >> >> On Tue, Aug 4, 2020 at 5:35 PM Xavier Bosch <bruixa.aburrid...@gmail.com> >> wrote: >> >>> Hi all, >>> I installed a fresh virtual machine with UB18.04 with Matlab 2019.1 >>> (Readthedocs recommends Matlab2018.1) and Vivado 2018.1, cloned the last >>> mlib_devel repository and finally get the startgs script ready. >>> >>> When placing a new FFT_BIPLEX_REAL_4x block in the simulink canvas I get >>> the following error message (see attached screenshot) related to a function >>> that cannot evaluate a model parameter. Has anyone had a similar problem? >>> I tried with different modules and all work great, just the FFT ones are >>> giving me trouble. >>> >>> When upgrading an already existing design it gives me the same error and >>> when compiling the same old design I got an error related to floating point >>> missing information. >>> Could this be a problem related to Matlab 2019? I do not have fast >>> access to a 2018 version. >>> >>> Thank you, >>> XB >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "casper@lists.berkeley.edu" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to casper+unsubscr...@lists.berkeley.edu. >>> To view this discussion on the web visit >>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA0QuM8O%2Bb%2BOt2sFSuDuRHJpo_yYE7HwPB%2BzWYNASatMoQ%40mail.gmail.com >>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA0QuM8O%2Bb%2BOt2sFSuDuRHJpo_yYE7HwPB%2BzWYNASatMoQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "casper@lists.berkeley.edu" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to casper+unsubscr...@lists.berkeley.edu. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEsQqnTju6%2BxHskCrG1Nmz7CowKqTKjy-hCEkYmdcPmkQ%40mail.gmail.com >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEsQqnTju6%2BxHskCrG1Nmz7CowKqTKjy-hCEkYmdcPmkQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA0Sw80EdOr_8_zZuo%2BcsXEJ_H5r7Mt4_EVZF4zXTYX6gQ%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMehrA0Sw80EdOr_8_zZuo%2BcsXEJ_H5r7Mt4_EVZF4zXTYX6gQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnG1O7EGL%2BS-fh1%2BK2v%2B1CfDiNSL%3DV%2B_1hih3PSxk0dRjA%40mail.gmail.com.