Hi Jack,
Almost all FFTs will make 300MHz these days, regardless of how good they are.
You may not need a good FFT. :-)
Here are the results I found for 18-bit 2048-point complex FFTs at SSR 16 and
32 in a ZCU111:
2048SSR16 Synth_Minutes Frequency LUTs REGs DSPs 36kb
BRAMs Watts Sim_Minutes
Astron FFT: 119.84 385.8 50310 37558 576 540.0
16.415 0.53
BxBFFT: 23.78 669.8 18806 25846 142 26.5
5.125 0.21
Spiral FFT: 37.71 595.2 39206 39887 252 0.0
8.064 0.49
Xilinx FFT: 38.70 585.1 33153 36137 126 0.0
7.847 5.56
2048SSR32 Synth_Minutes Frequency LUTs REGs DSPs 36kb
BRAMs Watts Sim_Minutes
Astron FFT: 198.50 382.8 89001 69444 1088 648.0
25.547 0.56
BxBFFT: 32.52 669.3 34410 62105 316 16.0
9.000 0.35
Spiral FFT: 54.74 603.9 62073 68091 492 0.0
13.717 0.47
Xilinx FFT: 66.91 408.5 76422 65176 306 0.0
17.941 4.72
These results are for FFTs with fully natural data order in and out — except
for the Astron FFT, which only supports a partially-natural data order out.
If you know of any other Verilog or VHDL SSR FFTs that I can get code for, I’d
be happy to benchmark those also. These are the ones I could find.
Regards,
Ross
> On Feb 24, 2022, at 4:39 AM, Jack Hickish <[email protected]> wrote:
>
>
>
> On Thu, 24 Feb 2022 at 05:05, 'Ross Martin' via [email protected]
> <mailto:[email protected]> <[email protected]
> <mailto:[email protected]>> wrote:
> Hi Jack,
>
> Yes, the Xilinx SSR FFT is good, but there are some caveats. In my testing,
> its performance degrades severely if the FFT size is greater than 8192 or if
> the SSR is greater than 8. It’s very good on both DSP and BRAM utilization,
> but it’s mediocre on LUT usage and power consumption. It takes longer to
> synthesize than other FFTs, and simulation is incredibly slow: it takes about
> 10 times longer to complete an RTL simulation with the Xilinx SSR FFT than
> with any other FFT that I tested. It’s also missing some features, like any
> form of synchronization or even a reset. Thus it takes some work to make
> sure it starts taking the FFT at the desired time, and that might cause some
> problems synchronizing multiple FFTs for beamforming or cross-channel
> correlations.
>
> So it’s good if its high points are what matters to you and you can get
> around its low points.
>
> What FFT size and SSR are you looking for? What type of application?
>
> Hi Ross,
>
> Thanks for sharing your experience. The lack of reset I find particularly
> perplexing and potentially troublesome. I did dig a little into the HDL which
> is under the block, only to find the source files littered with "Xilinx
> doesn't support this code, contact the author directly", which made me smile.
>
> At the moment I'm just sizing up options for a potential DSA2000 channelizer.
> Notionally (subject to occasional wild spec changes) my use case is a few
> parallel 2048-point FFTs with an SSR factor of either 16 or 32, depending on
> where other specs land and how much I can be bothered to fight with timing
> closure. But 2 weeks ago the spec was for a 32k point FFT, and based on an
> email thread I'm on it could be about to change to lots of parallel 512-point
> transforms. So.... :shrug:. Currently I'm mostly just sizing up resource use
> and getting some data points for power consumption on real hardware (iwave
> zu11 SoM, for the interested) -- the block builds fine (with a bunch of other
> peripheral CASPER FIRs / other logic) fine at 300 MHz with SSR 32, and
> simulates plausibly (using Jenny Smith's sim scripts) which is all I need for
> now.
>
> Performance I'm sure will ultimately be important, but requires better system
> requirements than I have to be in any way meaningful. For now, I'm really
> just using the block as a baseline for what's possible -- the CASPER block
> has some pretty significant deficits for large SSR factors which mean I don't
> really even want to use it as a place holder for benchmarking. I suspect I'll
> be revisiting implementation choice down the road (at which point I'd imagine
> there will be a good chance I'll be hitting you up asking to try out your
> latest offerings!)
>
> Cheers
> Jack
>
> PS: Thanks also to Talon, who pointed me off-list to ASTRONs
> complex->dual-real descrambler, which I think could probably be plugged
> straight into the Xilinx SSR FFT if necessary
> https://github.com/talonmyburgh/casper_dspdevel/blob/master/casper_wb_fft/fft_sepa_wide.vhd
>
> <https://github.com/talonmyburgh/casper_dspdevel/blob/master/casper_wb_fft/fft_sepa_wide.vhd>
>
>
> Regards,
>
> Ross
>
>
>
>> On Feb 23, 2022, at 5:14 AM, Jack Hickish <[email protected]
>> <mailto:[email protected]>> wrote:
>>
>> Hi All,
>>
>> As others have reported
>> (https://www.mail-archive.com/[email protected]/msg08238.html
>> <https://www.mail-archive.com/[email protected]/msg08238.html>) the
>> Xilinx SSR FFT is pretty good.
>>
>> However, I want to do two real transforms instead of one complex -- does
>> anyone happen to have an unscrambler already made which I can steal?
>> Otherwise I suppose I'll have to make my own, which would be terribly
>> tedious :)
>>
>> Cheers
>> Jack
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "[email protected] <mailto:[email protected]>" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected]
>> <mailto:[email protected]>.
>> To view this discussion on the web visit
>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSk0A7zP%2BgGwOo_VWW3QZv8cFOKtggiNqEqfdfCTRF72pQ%40mail.gmail.com
>>
>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSk0A7zP%2BgGwOo_VWW3QZv8cFOKtggiNqEqfdfCTRF72pQ%40mail.gmail.com?utm_medium=email&utm_source=footer>.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "[email protected] <mailto:[email protected]>" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected]
> <mailto:[email protected]>.
> To view this discussion on the web visit
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/3598CB06-4E6F-4060-A76F-31451029DD37%40ieee.org
>
> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/3598CB06-4E6F-4060-A76F-31451029DD37%40ieee.org?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/400D11AD-F545-4602-95BA-E88CD38733ED%40ieee.org.