Dear Mitch,

Thank you for your help in this matter.  To clarify : Our use-case is a 
single 100GbE connection over a splitter cable. We will never need to have 
the four SFP28s act independently. 

On Tuesday, June 27, 2023 at 10:29:22 AM UTC-4 Mitch Burnett wrote:

> Ken,
>
> Sorry for all the typo’s in that second paragraph. Clarifying a bit here:
>
> There is not a way in Simulink, that I am aware of, to interface with 
> those transceivers to have four individual connections to a 25 GbE network. 
> For the ZCU111, using the CASPER 10G ethernet core in Simulink has been 
> demonstrated in Simulink for individual connections using the SFP28 cages. 
> It would be feasible to believe the ZCU216 can do this too, but I am not 
> sure who may be working on this.
>
> Mitch
>
> > On Jun 26, 2023, at 10:37 AM, Mitch Burnett <[email protected]> wrote:
> > 
> > Hi Ken,
> > 
> > Yes, CASPER interfaces with these using the 100GbE core in Simulink. The 
> transceivers attached to the four lanes of the 4x25 SFP28 cage are 
> aggregated to implement a single CAUI-4 100G PHY using the integrated CMAC 
> on UltraScale+.
> > 
> > Currently, there is not a way, that I am aware of, to interfere with 
> those individually for individual connections to a 25 GbE network. For the 
> ZCU111, using the SFP28 cages for 10 GbE using the CASPER 10G ethernet 
> core. It would be feasible to believe the ZCU216 can do this too, but I am 
> not sure who may be working on this.
> > 
> > Mitch
> > 
> > 
> >> On Jun 24, 2023, at 6:40 PM, Ken Semanov <[email protected]> wrote:
> >> 
> >> The ZCU216 board has 4 ports for SFP28 ethernet on J29. These are used 
> for 25GbE network connections. This is marked with an arrow in the image 
> shown. Does CASPER interface with these ports via any simulink model blocks 
> in the FPGA? 
> >> 
> >> <ZCU216ports.png>
> >> If not, what are some other methods for interfacing with those SFP28 
> ports?
> >> 
> >> -- 
> >> You received this message because you are subscribed to the Google 
> Groups "[email protected]" group.
> >> To unsubscribe from this group and stop receiving emails from it, send 
> an email to [email protected].
> >> To view this discussion on the web visit 
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/d6e3277d-461d-4f07-8403-a8beb693f0ffn%40lists.berkeley.edu
> .
> >> <ZCU216ports.png>
> > 
> > -- 
> > You received this message because you are subscribed to the Google 
> Groups "[email protected]" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an email to [email protected].
> > To view this discussion on the web visit 
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/440AE631-1DB5-46CA-B26F-BCA905B870CA%40byu.edu
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/3275e0ae-f41d-4640-b3bd-c2dd7c7f3127n%40lists.berkeley.edu.

Reply via email to