Hi Diego,
Looking at the schematics (we do not have the board, at least yet) SYNC
IN is a pulse to synchronize PLL phase between boards, for external
reference you should use CLK IN or Ext ref in.
Cheers,
Kaj
On 25.3.2025 21.35, Diego Gallardo wrote:
Hi everyone,
I would like to use a 10 MHz reference signal from an RF generator as an
input for the RFSoC 4x2. Could you advise on the correct way to achieve
this?
I attempted to connect the reference signal to the "SYNC IN" port and
modified the PLL registers using TICS PRO, but it did not work.
Additionally, I am unsure if this is the proper approach.
Any guidance would be greatly appreciated.
Best regards,
Diego Gallardo
--
You received this message because you are subscribed to the Google
Groups "casper@lists.berkeley.edu" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to casper+unsubscr...@lists.berkeley.edu
<mailto:casper+unsubscr...@lists.berkeley.edu>.
To view this discussion visit https://groups.google.com/a/
lists.berkeley.edu/d/msgid/casper/a0414f9f-409c-4d3b-b2d4-
fece97ee3943n%40lists.berkeley.edu <https://groups.google.com/a/
lists.berkeley.edu/d/msgid/casper/a0414f9f-409c-4d3b-b2d4-
fece97ee3943n%40lists.berkeley.edu?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"casper@lists.berkeley.edu" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to casper+unsubscr...@lists.berkeley.edu.
To view this discussion visit
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/31894dfa-62f4-4fcc-859f-1ed7738d2955%40utu.fi.
