Hi Everyone,
We have followed the Casper tutorials 0.1 documentation for working on the RFSoC 4X2 board. Process involved installing Ubuntu 20.04 Matlab 2021a Vivado 2021.2. After installation of above packages, we tried to run some example as mentioned at following webpage https://github.com/casper-astro/tutorials_devel/tree/main/rfsoc we tried these examples (for RFSoc 4x2):- "tut_onehundred_gbe", "tut_platform" "tut_rfdc" & "tut_spec", The "tut_onehundred_gbe", does not compile and run successfully, it hangs in the System generator screen at the point of "Propagating sample times : started", and the process has to be force killed. Similar is the case with "tut_platform" and "tut_rfdc" The example of "tut_spec" initially worked successfully and we managed to generate the bitstream which was successfully transferred to the rfsoc 4x2 board and gave the desired resulting plot. But the above example "tut_spec" when tried again, it also became not reproducible and stuck at the same point of the system generator. Please guide what could be the issue. Further, we wish to know that in the example of a spectrometer how do we modify it so that we can inject a frequency from outside and generate the power spectrum of the same. Regards, Tilak -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPGD9Mnii03TCO-QMdSBLB%2B%2BhwHz3BAUnaY17qsqWehA2RnVag%40mail.gmail.com.
