Hi!

Thanks for the link to circuitRF, it looks very promising.

I have been using openEMS (FDTD) and Palace (FEM). FDTD is OK if you can use even grid (e.g. infinitely thin PCB traces that align to the grid). If there are curved shapes, FEM (via gmsh) can handle them much better.

I wrote (with AI assistance) an unregistered Julia package for my specific problems and it has performed quite well:
https://version.aalto.fi/gitlab/wiikk1/PalacePCB.jl

Looking forward to try Palace via circuitRF 3D editor!

Thanks,
Kaj

On 04/11/2026 18:07, Alan Wilson-Langman wrote:
Hi Jonathan,

Two more options worth a look for your colleague.

Remcom’s XFdtd <https://www.remcom.com/xfdtd-3d-em-simulation-software> is a full-wave 3D electromagnetic simulator based on FDTD. Remcom are very supportive of academic research projects. If you or your colleague would like to explore it, let me know and I’ll connect you.

Also take a look at circuitRF <https://github.com/potatobeanradio/ circuitRF>. It brings together RF circuit design, layout and electromagnetic simulation, including connections to open-source tools such as openEMS, Palace and Gmsh. It looks like a useful option to explore for the RF design workflow, although the fit will depend on the specific PCB and signal-integrity requirements.

Best,
Alan

--
-------------------------------
CONFIDENTIALITY NOTICE: The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited.


On Wed, 04 Nov 2026 09:39:05 -0500, "'Weintroub, Jonathan' via [email protected] <mailto:[email protected]>" <[email protected] <mailto:[email protected]>> wrote:

    Much thanks to Karl and Sias for thoughtful and helpful replies.
    Others, please keep them coming. I am not the intended end user. Let
    me run these ideas by them, and I'll ask any resulting questions,
    make connections as kindly suggested, etc. Thanks, regards. Jonathan
    On Wed, Nov 4, 2026 at 12:55 AM Sias Malan <[email protected]
    <mailto:[email protected]>> wrote: > Hi Jonathan, > We do all our PCB
    EM analysis work in CST > <https://discover.3ds.com/test-and-
    validate-your-product-faster-simulia?
    _gl=1*2e541u*_up*MQ..*_gs*MQ..&gclid=CjwKCAiAqabXBhBUEiwAw_SQpaYGGb6zvmxNArtLE9whvGxBJ04G36tC7L19GyjaFWNeDYdaqugIQRoCapkQAvD_BwE&gbraid=0AAAAADqOeJRw3jefgq388GPBzJ3mS669z <https://discover.3ds.com/test-and-validate-your-product-faster-simulia?_gl=1*2e541u*_up*MQ..*_gs*MQ..&gclid=CjwKCAiAqabXBhBUEiwAw_SQpaYGGb6zvmxNArtLE9whvGxBJ04G36tC7L19GyjaFWNeDYdaqugIQRoCapkQAvD_BwE&gbraid=0AAAAADqOeJRw3jefgq388GPBzJ3mS669z>>. > This is a full 3D simulator which we also use for designing RF components > such as filters, couplers, OMTs and horns. The cost of this tool compared > to tools like ANSYS, AWR or ADS is reasonable and justifiable in our case > since we are using it for more than just PCB simulations. I am happy to > give you a 
demo of what we do if you are interested. The pricing model > for CST has not changed much in the last 6 years that we have been using > it. We procure it in 3 year cycles. Our institute is not a university, > but we have always benefitted from asking for discounts based on the fact > that we are a purely non-profit research based organization. That has > always given us some discount compared to the full commercial rates. > > We also use another simulation package which recently changed the costing > model similar to what you describe for Ansys. This prompted us to > re-evaluate the use of this package and to compare it to the competitors. > Our findings were that AWR > 
<https://www.cadence.com/en_US/home/tools/system-analysis/rf-microwave-design.html <https://www.cadence.com/en_US/home/tools/system-analysis/rf-microwave-design.html>>, > ADS > <https://www.keysight.com/us/en/lib/software-detail/computer-software/pathwave-advanced-design-system-ads-software-2212036.html <https://www.keysight.com/us/en/lib/software-detail/computer-software/pathwave-advanced-design-system-ads-software-2212036.html>>and > ANSYS are all priced similarly and are all really expensive. We have used SONET > <https://www.sonnetsoftware.com/ <https://www.sonnetsoftware.com/>>and Hyperlix > <https://www.siemens.com/en-us/products/pcb/hyperlynx/ 
<https://www.siemens.com/en-us/products/pcb/hyperlynx/>>in the past but we > have not been keeping up with their recent developments. It might be worth > looking into SONET especially since they had a good university program in > the past and their commercial rates were reasonable. > > The only advice I have is to ask them nicely for a discount, exclude the > packages you do not need and reduce the number of licenses. > > Hope this helps > Sias > > > > On Tue, 3 Nov 2026 at 20:44, 'Weintroub, Jonathan' via > [email protected] <mailto:[email protected]> <[email protected] <mailto:[email protected]>> wrote: > >> Hi CASPERites, >> >> A colleague has 
a need for high frequency advanced PCB EM wave and signal >> integrity simulation. These packages are favored: >> >> https://ansys.synopsys.com/products/electronics/ansys-hfss <https://ansys.synopsys.com/products/electronics/ansys-hfss> >> <https://ansys.synopsys.com/products/electronics/ansys-hfss <https://ansys.synopsys.com/products/electronics/ansys-hfss>> >> >> https://ansys.synopsys.com/products/electronics/ansys-siwave <https://ansys.synopsys.com/products/electronics/ansys-siwave> >> <https://ansys.synopsys.com/products/electronics/ansys-siwave <https://ansys.synopsys.com/products/electronics/ansys-siwave>> >> >> Ansys was recently acquired by Synopsys, and in common with 
their >> products in general, the above tools are subscription based, and, >> details aside, are quite expensive--prohibitively so in our context I think. >> >> In the distant past I arranged a membership of the Synopsys University >> Program >> https://www.synopsys.com/academic-research/university.html <https://www.synopsys.com/academic-research/university.html> >> At the time we were interested in digital tools, which Synopsys was >> focused on then I think. For example Synplicity for FPGA synthesis (as an >> alternative to XST). We got a highly discounted subscription rate on the >> license (and mixed experience with the tool, as it happens). >> >> Does anyone have relevant experience or 
advice? Has anyone managed to >> get any benefits from this university program? Anyhow get Ansys tools out >> of it? >> >> And more broadly what do CASPER teams use for comparably sophisticated >> simulation of high frequency hardware designs? >> >> Thanks, >> Jonathan >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected] <mailto:[email protected]>" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <mailto:casper%[email protected]>. >> To view this discussion visit >> 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24i7A1YJUGEq1%3D5z88sykzJ_gv-O74NoQiUbh9JHe1qqw%40mail.gmail.com <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24i7A1YJUGEq1%3D5z88sykzJ_gv-O74NoQiUbh9JHe1qqw%40mail.gmail.com> >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24i7A1YJUGEq1%3D5z88sykzJ_gv-O74NoQiUbh9JHe1qqw%40mail.gmail.com?utm_medium=email&utm_source=footer <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24i7A1YJUGEq1%3D5z88sykzJ_gv-O74NoQiUbh9JHe1qqw%40mail.gmail.com?utm_medium=email&utm_source=footer>> >> . >> > > > *Disclaimer* > > The information contained in this communication from the sender is > 
confidential. It is intended solely for use by the recipient and others > authorized to receive it. If you are not the recipient, you are hereby > notified that any disclosure, copying, distribution or taking action in > relation of the contents of this information is strictly prohibited and may > be unlawful. > > -- > You received this message because you are subscribed to the Google Groups " > [email protected] <mailto:[email protected]>" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <mailto:casper%[email protected]>. > To view this discussion visit > 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFkG%3Dd%3DuJQaG2LT8htHzuGneb1PZDOHOt%3D%3D%2BQhGntfEEWyQniQ%40mail.gmail.com <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFkG%3Dd%3DuJQaG2LT8htHzuGneb1PZDOHOt%3D%3D%2BQhGntfEEWyQniQ%40mail.gmail.com> > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFkG%3Dd%3DuJQaG2LT8htHzuGneb1PZDOHOt%3D%3D%2BQhGntfEEWyQniQ%40mail.gmail.com?utm_medium=email&utm_source=footer <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFkG%3Dd%3DuJQaG2LT8htHzuGneb1PZDOHOt%3D%3D%2BQhGntfEEWyQniQ%40mail.gmail.com?utm_medium=email&utm_source=footer>> > . > -- You received this message because you are subscribed to the Google Groups 
"[email protected] <mailto:[email protected]>" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:casper%[email protected]>. To view this discussion visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24SJk8SYJrnXx7S%3Dt0JZLFPCRKGpjuRWsKDVU70vnvXnw%40mail.gmail.com <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPDrt24SJk8SYJrnXx7S%3Dt0JZLFPCRKGpjuRWsKDVU70vnvXnw%40mail.gmail.com>.

--
You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:[email protected]>. To view this discussion visit https://groups.google.com/a/ lists.berkeley.edu/d/msgid/casper/CAB1E%2Bq9q3- ZQoUh2Q5JakjcDyzHfpdjeGu7pYEvF9ZC0Osp_bQ%40mail.gmail.com <https:// groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAB1E%2Bq9q3- ZQoUh2Q5JakjcDyzHfpdjeGu7pYEvF9ZC0Osp_bQ%40mail.gmail.com? utm_medium=email&utm_source=footer>.

--
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/6f3b4e1e-714e-4c62-bdca-61ac241a510c%40utu.fi.

Reply via email to