|
Hey I resemble that remark – I used a piece of Oriental looking runner –
got it the local home center they sell it as stair runner. They
just happened to have some that was just about the right width for the cabin
rubber backed no slipping. They even provided edging to put on the ends
actually I told them I wasn’t handy and might screw it up so they gave me
some extra and there was enough to do all the exposed cut edges. Lasted 3
years – getting replaced this year because it’s starting to look a
little worn I suppose I could have it cleaned but figured it was time to change
colors – since it only ran me about 35 bucks total it’s cheap
enough. Dave C27 #5212 Windabout http://dpbcc.home.comcast.net From: Hey Ted, nice to meet another local
guy! There are three or four of us that appear from time-to-time.
Usually when TF isn’t talking with Dave <G>. Snaps really aren’t needed.
Because of all the cut-outs, just laying it down will hold it in place. I
went to Lowes two years ago and purchased a Berber remnant for $40. After
the cut-out, I just laid it down. It doesn’t move one bit. Bob Mann Windcatcher ’85 C27, #5928 http://homepages.comcast.net/sailrmann -----Original Message-----
|
- catalina27-talk: Replacing carpet ted glynn
- RE: catalina27-talk: Replacing carpet Robert Mann
- RE: catalina27-talk: Replacing carpet DaveBreski
- Re: catalina27-talk: Replacing carpet Henry Hubbard
- Re: catalina27-talk: Replacing carpet Jeffery L. Sheler
- RE: catalina27-talk: Replacing carpet - Better... Richmond Sky Tours
- RE: catalina27-talk: Replacing carpet Mark Tamblyn

