I have a CDI Flexible Furler which has the single line as does the
Harken. It is sensitive to the location of the first block that the
furling line goes to, but works nicely when the lead angle is
right. It's never fouled on me at all - just harder to furl when the
angle isn't right. I discovered this after a year of cursing the
furler when I replaced the bow pulpit and experimented with placement
of the first block.
We've had some discussions on this in the past and my recollection
was that the CDIs, Harkens and Schaffers were all pretty highly
regarded. The CDI is probably the least expensive of the 3 brands in
general, and may not work quite as smoothly, but it works well for me
(casual cruising).
Chris
At 12:20 PM 5/17/2006, you wrote:
FWIW, two years ago I replaced the original Harken furler with a
Schaefer 1100, and I have been very pleased. Unlike the Harken,
which had a continuous loop to furl and unfurl, the Schaefer has a
drum and a single line, which winds on the drum when you deploy the
sail by pulling on the sheet. To furl, you pull on the line wrapped
around the drum. This is a much simpler system and less likely to
foul. The Schaefer costs a few bucks more than some other brands,
but I think it's well worth it.
Jeff Sheler
s/v Windsome
C27TR #6594
Hampton, VA
At 12:10 PM 5/17/2006, you wrote:
I would like to install a furling on my 27 but not too sure of a
type or kind that would be a good choice. I haven't set a price
limit yet since I need to know what is out there first. Obviously I
would like the best buy for the money spent but I also understand
the importance of quality for value. Any suggestions?
West Winds land locked Alberta
