Thanks Doug, and thanks again for the lower shroud deck fittings and spreader
bracket deal. Kind regards, Mike.
-------------- Original message ----------------------
From: "Doug Simonsen" <[EMAIL PROTECTED]>
> My '74 has three holes at the base of the mast. Threaded holes on each side
> accept machine screws (3/16 inch I think) by which a bail is attached to the
> mast -- the bail is the attachment point for the boomvang. An unthreaded
> hole in front of the mast is a weep hole.
>
> Doug Simonsen
>
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Wednesday, July 26, 2006 7:57 AM
> Subject: catalina27-talk: mast step
>
>
> > Hello, I,m getting ready to put the mast up on my 1975 C-27 for the first
> > time and noticed there are 4 holes in the bottom of the mast and in the
> > cabin top mast base, however there are no connectors to be found. What do
> > I use? pins? screws? any help with this would be much appreciated and
> > thanks in advance. Kind regards, Mike. C-27 hull# 1801
> >
>
>
>
