excellent report Rudy. Really helpful. Yeah, I would stick to WEST system or the other leading epoxy for marine applications. WEST makes it easy with the pump system.
http://www.gougeon.com/ -tf no relation to the Gougeon brothers Listees, > > A couple of months ago it was suggested that Gorilla glue might work > well on sailboat projects. By then I'd already used it on a section of > rubber rub rail that had come loose on my boat. I did so because I 'd > used the glue for a number of shop projects, indoor and outdoor, where > its one component nature promised at least more convienient to use than > epoxy and because my shop work with it seemd very satisfactory. > > Now no longer: it still holds strong for indoor work (two+ years for > radiator covers), but an outdoor project has literally collapsed: the > deck bin that I use at my house for bird food storage had come apart at > many of the joints. This spring I reglued these joints with Gorilla glue. > > Yesterday I saw that the glue had turned to powder in all the joints, > which are now sprung and need regluing. I'll use Gugeon epoxy for > that. (I specify Gugeon (sp?) because I've found that not all epoxies > are equal: Some Sears epoxy I used to repair a dry sailed dingy years > ago absorbed water and lost strength.) > > The rub rail is still holding well, and one of you reported that in a > similar use was holding well after two years. I'l tell you about my > rail if things change. > > My guess is that my fake redwood finished bird food box has some > chemical in the finish or the wood that decomposes Gorilla glue. In > every other use it has been good. > > Rudy B. > Phoenix, #2237 > Pasadena, Md. > > >
