All they'll make custom with spinning up the $$$.
Phil Agur s/v Wing Tip -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Ebolean Sent: Friday, November 09, 2007 1:36 PM To: [email protected] Subject: Re: catalina27-talk: Genoa Car for 15 x 3 Track on 1972 Catalina 27 you might give Garhauer http://garhauermarine.com/ a call and see if they have anything that would work, even though it may not be listed in their online catalog. They make high quality stuff Bob Musson 88 C27 #6508 Piratizer Selby Bay, MD Tom Owen wrote: I have a 1972 Catalina 27 standard rig with what we believe to be 15/16" wide by 3/16" tall Genoa track. I am looking for 2 cars to supplement the existing ones for spinnaker return blocks. Discussions with Catalina Direct indicate that this track is no longer in production and may be the same track that was used on some of the Catalina 22's. The track is ~ 15/16" wide with a ~ 2/16" (1/8") "T". The overall height of the track is ~ 3/16". The track is depressed in the center at an angle similar to the flat head fasteners in every hole (there are no empty holes for a pin stop) of the track. The car has a screw that goes against the track and uses the track's flathead fasteners as a positive stop. Any help in locating 2 cars would be most appreciated. Thanks in advance, Tom Owen Blue Heaven, #279 King George, VA The track profile is similar to: __ __ (_ \___/ _) _| |_ |_________|
