John According to the manual, "...fill the gear box with the prescribed oil up to the top mark on the dipstick". It also states, "When checking the oil level, dipstick to be inserted only - do not screw in". And then tighten the dipstick after checking the level. Hope this helps. John Jennings
In a message dated 4/22/2008 9:15:21 A.M. Eastern Daylight Time, [EMAIL PROTECTED] writes: I bought a 1982 cat27. I am trying to check the fluid level of the transmission. I have a Universal 11 hp inboard desiel. The dip stick is a bolt on top of the trans.When I unscrew it ,the dip stick is about 3inches long. The only mark is a cut on the stick about one half inch from the bottom of the stick. There is so little space I think this is the add fluid notch, but where is the full mark? Can anyone help with my problem? Thank you. On Mon Apr 21 8:52 , DHoy <[EMAIL PROTECTED]>sent: You've put an immense amount of work and thought into/ Bijou. /We've all gained a great deal from you. The Association just won't be the same without your wisdom and input. We hope that you can stay connected. Do you think you might just put a cover on /Bijou/ and wait for the day when the lad is older and ready to take on some responsibility? . Regardless, the best of wishes to you. Dave Hoy WYANOKEE #6295 Camden, Maine ____________________________________ Msg sent via CableONE.net MyMail - http://www.cableone.net= **************Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos. (http://autos.aol.com/used?NCID=aolcmp00300000002851)
