Hi......I posted how I replaced my bulkheads about 5-6 months ago, on a 27' Tall rig. Check the archives; mine were done sandwiching marine plywood between two sheets of 1/4" aluminum sheeting, etc. etc. If you can't fine the post, lemme know. Jim Huhta Sturgeon Bay, WI S/V "SEA-130", Hull 4402
--- On Mon, 6/23/08, Pamela <[EMAIL PROTECTED]> wrote: > From: Pamela <[EMAIL PROTECTED]> > Subject: RE: catalina27-talk: Bulkhead Replacement > To: [email protected] > Date: Monday, June 23, 2008, 6:45 AM > Do one at a time so that the boat doesn't wist into a > new position. > > > Date: Sun, 22 Jun 2008 20:20:39 -0700From: > [EMAIL PROTECTED]: catalina27-talk: Bulkhead > ReplacementTo: [EMAIL PROTECTED] purchased > a 1974 Catalina 27 this past winter after 20 years since my > last boat (a cal20). It was on the hard for about 10 years > and required some work to get it in the water at the start > of this season. It took a lot of sweat equity and as I > just discovered today it looks like it will continue. > I've got water leaking at both the starboard and port > side shrouds down through deck and compromising the > integrity of the bulkheads by rotting. It looks like I will > have to replace them. I thought I recently saw some > discussion on how to replace the bulkheads. Any information > on the sequence of how to do this and a recommendation on > the type of material to use would be appreciated. Can it be > done with the mast up already? I want to avoid stepping down > the mast.Joe > _________________________________________________________________ > Introducing Live Search cashback . It's search that > pays you back! > http://search.live.com/cashback/?&pkw=form=MIJAAF/publ=HMTGL/crea=introsrchcashback
