Twist off the top ...

Sorry, too much slang, I guess. When the main is properly set, the luff 
tension will have telltails from all battons streaming staight aft, or 
possibly the top one falling off occasionally. When you "twist off the 
top", you keep the boom in position with the traveller, and reduce luff 
tension by easing the sheet. So the main twists off at the top. The more 
you ease the sheet, the more of the sail twists off. That means it is 
depowered, and it also means less force at the top of the sail so much 
less healing force.

Tom





el sailor <[EMAIL PROTECTED]> 
Sent by: [email protected]
07/18/2008 02:28 PM
Please respond to
[email protected]


To
[email protected]
cc

Subject
Re: catalina27-talk: Yesterdays sail






Thanks Tom,
Good advice.  I only have the 150, a newer sail made by North Sail and 
good for 20 to 25 tops. 

Not familiar with the term "twist off the top of the main". 

I do have one reef point also.

Have to agree with the dragging the rudder and/or rounding up!

Earl

----- Original Message ----
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: [email protected]
Sent: Friday, July 18, 2008 12:54:40 PM
Subject: Re: catalina27-talk: Yesterdays sail


I have exactly the same boat/rig. I can tell you what I do, though I don't 
swear to it being "best practice" ....... 

I'm starting w/a 135 or 155. On a day that shows signs of getting windy, 
its the 135. The sailmaker rates it as OK to 21 knots. The 155 is a light 
mylar, old, and I only use it on light air days. 

As the wind gets up, first thing I do is twist off the top of the main. 

Next is a pretty deep reef in the main. I only have one reef point and 
it's a substantial reduction. If I had two points, I'd work through them 
sequentially. 

Only after I'm overpowered with a deep reefed main do I reduce headsail 
size. I let heal angle tell me when to change. I've never been able to get 
the helm to balance worth a hoot at a heal angle >20 degrees. After that, 
I'm dragging the rudder through the water and/or rounding up, and 
basically just forcing things rather than sailing efficiently. 

The other side of it is, my boat sails nicely with just a working jib on 
windier days. If I just want to be out on the water and the wind is up, 
I'll put up a heavy weight, high clewed jib of about 100% that I bought 
used (well used) off a used sail site. With the main furled away and the 
boom safely strapped down, I can have fun out there when others are 
working their butts off. When it's too much for that, it's time to be in 
the marina. 

Tom 



"Tom Deters" <[EMAIL PROTECTED]> 
Sent by: [email protected] 
07/18/2008 10:19 AM 

Please respond to
[email protected]



To
[email protected] 
cc

Subject
Re: catalina27-talk: Yesterdays sail








All - 
 
New to the Cat 27 handling in rougher weather, I find the spade rudder and 
tiller somewhat difficult, almost uncomfortable to handle in 18-20mph 
wind. Getting your shoulder wet is great fun, but the tenderness can be 
...as the wife would say.."Is it supposed to do this?". 
 
This season on Lake Michigan, we have ample wind. I generally reef and 
unfurl the head sail to find the balance and helm that is manageable. 
 
Has ther been any discussion on best performance and sail plan of the Cat 
27 in different stink and wave?   I have a 1986 TR, Tiller w/ Traveler 
cabin top. 
 
TMDeters 
Summer Wind 
Kenosha, WI 

On 7/17/08, el sailor <[EMAIL PROTECTED]> wrote: 
We left about 10 for a "three hour tour". Actually we'd planned to spend 
most of the day out and about.  Some of you may recognized the quoted 
phrase from the Gillivan's Island theme song.  It was a glorious time; the 
wind started in the West at 5 to 10; by 3 they were out of the East @ 15 
to 20 and the waves were 2 - 4 with the occasional 6 - 7 footer.  That was 
our first time rail down on Nautidog.  We were running a 150% jenny and an 
unreefed main.  When anyone moved they had a good grip on something.  K 
was laughing and yelling how much it felt like a continuous roller 
coaster.

KatznEarl2
s/v Nautidog #3188
Hampton







Reply via email to