but the idea is clear now. there is no way to have it in bgb unless it is in ospf and it is not because it is connected.
i am sure you are not the one who wrote this lab :) thanks alot suliman --- Suliman Al-Mazroua <[EMAIL PROTECTED]> wrote: > do you mean that i have to add in bgp redistribute > connected. actually the lab ask not to do it this > way. > > --- Scott Morris <[EMAIL PROTECTED]> wrote: > > > Yup... And that's where the problem is. Since > you > > are already engagine the > > "redistribute connected" on R8, when you do "show > ip > > route ospf" it doesn't > > show up there, so it's not tagged as the best > path. > > So if you want an > > originating route on that router to get to BGP, > > you'll need to do a > > "redistribute connected" there as well! > > > > > > :) > > > > > > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service > > Provider) #4713, JNCIE > > #153, CISSP, et al. > > CCSI/JNCI-M/JNCI-J > > IPexpert VP - Curriculum Development > > IPexpert Sr. Technical Instructor > > [EMAIL PROTECTED] > > http://www.ipexpert.com > > > > > > > > -----Original Message----- > > From: Suliman Al-Mazroua > > [mailto:[EMAIL PROTECTED] > > Sent: Friday, February 23, 2007 12:08 AM > > To: [EMAIL PROTECTED]; > > [email protected] > > Subject: RE: External OSPF to BGP > > > > it is connected to R8. > > > > R8(config)#do sh ip rou 150.50.4.0 > > Routing entry for 150.50.4.0/24 > > Known via "connected", distance 0, metric 0 > > (connected, via interface) > > Redistributing via ospf 100 > > Advertised by ospf 100 subnets > > Routing Descriptor Blocks: > > * directly connected, via FastEthernet0/0 > > Route metric is 0, traffic share count is 1 > > > > R8(config)#do sh ip bg > > R8(config)#do sh ip bg > > BGP table version is 3, local router ID is > 200.0.0.8 > > Status codes: s > > suppressed, d damped, h history, * valid, > best, > i > > - internal, > > r RIB-failure, S Stale > > Origin codes: i - IGP, e - EGP, ? - incomplete > > > > Network Next Hop Metric > > LocPrf > > Weight Path > > *> 8.8.8.0/24 0.0.0.0 0 > > > > > 32768 ? > > *> 150.50.5.64/27 0.0.0.0 0 > > > > > 32768 ? > > R8(config)#do sh ip rou os > > > > R8(config)# > > > > --- Scott Morris <[EMAIL PROTECTED]> wrote: > > > > > If R8 is where you are doing redistribution, do > > all of your commands > > > on R8. > > > > > > Scott > > > > > > -----Original Message----- > > > From: Suliman Al-Mazroua > > > [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, February 22, 2007 11:40 PM > > > To: [EMAIL PROTECTED]; > > > [email protected] > > > Subject: RE: External OSPF to BGP > > > > > > sure > > > > > > R8: > > > R8# sh run > > > Building configuration... > > > > > > > > > version 12.4 > > > service timestamps debug datetime msec service > > timestamps log datetime > > > msec no service password-encryption ! > > > hostname R8 > > > ! > > > boot-start-marker > > > boot-end-marker > > > ! > > > enable secret 5 $1$UGQg$ji9OEVknrbFvM602QQJxG0 ! > > > no aaa new-model > > > ! > > > resource policy > > > ! > > > memory-size iomem 15 > > > ip subnet-zero > > > ! > > > ! > > > ip cef > > > ! > > > ! > > > no ip domain lookup > > > > > > interface Loopback0 > > > ip address 200.0.0.8 255.255.255.255 > > > ! > > > interface Loopback1 > > > ip address 8.8.8.1 255.255.255.0 > > > ip ospf network point-to-point > > > ! > > > interface FastEthernet0/0 > > > ip address 150.50.4.8 255.255.255.0 > > > duplex auto > > > speed auto > > > ! > > > interface FastEthernet0/1 > > > no ip address > > > shutdown > > > duplex auto > > > speed auto > > > ! > > > interface Serial0/0/0 > > > ip address 150.50.5.69 255.255.255.224 ! > > > router ospf 100 > > > router-id 200.0.0.8 > > > log-adjacency-changes > > > redistribute connected subnets > > > network 8.8.8.1 0.0.0.0 area 0 > > > network 150.50.5.69 0.0.0.0 area 0 > > > ! > > > router bgp 65078 > > > no synchronization > > > bgp router-id 200.0.0.8 > > > bgp log-neighbor-changes > > > bgp confederation identifier 200 > > > redistribute ospf 100 match internal external 2 > > > neighbor 150.50.5.68 > > > remote-as 65078 no auto-summary ! > > > ip classless > > > ! > > > ! > > > no ip http server > > > no ip http secure-server > > > ! > > > ip access-list standard inospf > > > permit 150.50.4.0 0.0.0.255 > > > ip access-list standard nobgp > > > permit 150.50.5.64 0.0.0.31 > > > ! > > > ! > > > route-map fa0/0 permit 10 > > > match ip address inospf > > > ! > > > route-map fa0 permit 10 > > > match ip address inospf > > > ! > > > route-map ostobgp deny 10 > > > match ip address nobgp > > > ! > > > route-map ostobgp permit 20 > > > match ip address inospf > > > ! > > > route-map ostobgp permit 30 > > > ! > > > ! > > > ----------------------------------------------- > > > > > > R8#sh ip bgp > > > BGP table version is 3, local router ID is > > 200.0.0.8 Status codes: s > > > suppressed, d damped, h history, * valid, > > best, > > i > > > - internal, > > > r RIB-failure, S Stale > > > Origin codes: i - IGP, e - EGP, ? - incomplete > > > > === message truncated === ____________________________________________________________________________________ It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/
