Not a requirement, but good habit to get into. In the upcoming updates to this lab (which I'm working on at the moment) you'll need them or it could hurt in a big way. :) But it's best to be able to think your way through what is asked and make sure you aren't letting too much through. No, your lab isn't graded on general sloppiness, but if something you did interferes with something else and you don't recognize it, that could be a problem! HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor A Cisco Learning Partner - We Accept Learning Credits! [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Morris, Jason L. Sent: Tuesday, February 26, 2008 9:31 PM To: [email protected] Subject: [OSL | CCIE_RS] IPExpert R&S WB Redistribution I have a question on section 8 of the ipexpert R&S workbook this is the section on redistribution. On task 8.9 (the real heart of the redistribution) I didn't really have to many problems, but I did the whole thing without using any route maps to control the redistro. after looking at the proctor guide they are route-map'en their butts off and restricting everything. I can't find anything 'wrong' with the way I did it, other than it may be a little sloppy, but no loops, or unreachable networks as far as I can tell. Is it just good habit for the exam to use a route-map every time you redistro? Is the way I did it acceptable for the exam as long as it meets the requirements? I just assumed from reading the question, because it didn't say ONLY these routes I shouldn't restrict it. Jason Morris
