You need another router to act as a frame-relay switch. The serial cables will all go into that router. We use 2520's and 2522's, but if you have access to any 2600 or 3600 with an NM-4T or NM-8A/S module, you can do the same thing. Cheers,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor A Cisco Learning Partner - We Accept Learning Credits! [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 05, 2008 8:33 AM To: [email protected] Cc: [EMAIL PROTECTED] Subject: Help for setting up lab Hello Sir! I have just received the phurchased material from Ipexpert. I am setting up a lab like the one on page 5 in the workbook. Not the same routers as specified on page 5 but some routers that are usable. My concern is how to pshycially make the cabling between these three interfaces: R2: Se0/1/0 and R5: Se0/1/0 and R6: Se0/1/0 For me it looks like Se0/1/0 on R2 is a point to multipoint interface ( because it also has link to R4 Se0/0/0 ) What sort of cabels are needed to maked theses frame-relay interfaces connect in a lab environment? Kind Regard Rehman Moghal
