Hi scott,
I've been doing task 5.7 to Section 5, nevertheless it seem who I
fixed every problem concern virtual-Link, however last is
strange.
On Router 1 I've FA0/1 in area 1 (isolated area), but fa0/0 is
area0, ABR is present. OSPF is interface-centric.Furthemore I
have only follow indication from debug
Any idea to help me?
*Mar 25 01:34:11.179: %OSPF-4-ERRRCV: Received invalid packet:
mismatch area ID, from backbone area must be virtual-link but not
found from 150.50.12.1, FastEthernet0/1
R1(config-router)#
*Mar 25 01:34:21.179: %OSPF-4-ERRRCV: Received invalid packet:
mismatch area ID, from backbone area must be virtual-link but not
found from 150.50.12.1, FastEthernet0/1
but fixed with on R1 with: area 1 virtual 1.1.1.1 (I thought
FA0/1 is set up under area 1 which has mismatch with 12.1 from
same router, therefore I will use Router ID of R1)
Thereafter I've met an another problem:
*Mar 25 01:35:14.099: %OSPF-4-ERRRCV: Received invalid packet:
mismatch area ID, from backbone area must be virtual-link but not
found from 150.50.12.2, FastEthernet0/1
R1(config-router)#area 1 virtual-link
*Mar 25 01:35:24.099: %OSPF-4-ERRRCV: Received invalid packet:
mismatch area ID, from backbone area must be virtual-link but not
found from 150.50.12.2, FastEthernet0/1
Also Fixed with area 1 virtual 2.2.2.2 (I thought FA0/1 is set up
under area 1 which has mismatch with 12.2 from another router,
therefore I will use Router ID of R2)
It look like it working, however there something wrong with this
config?
If you need I can post global config.
Any idea to help me?Thanks in advance for help.
--
This message is intended for the individual(s) to whom it is addressed and may
contain information that is privileged or confidential.
If you are not the addressee you must not read,use or disclose the contents of
this email.
Whilst all reasonable care has been taken to avoid the transmission of viruses,
the recipient should carry out virus and other checks,
as they consider appropriate.
Myself accepts no responsibility in this regard.
