Hello Rehman, If you setup your lab exactly like the labs a ProctorLabs it looks like you're using the wrong interface on R2 Fa0/1 connects to CAT2, I think you need Fa1/0 as this connects to port 2 on CAT1. Also I noticed that you have the ports on CAT1 setup on two separate vlans. You will need to put both of those ports on the same vlan before you can ping across. If I can be of further assistance, please let me know. -- Drew LePla Comp TIA A+, CCNA Technical Support Engineer - IPexpert, Inc. Telephone: +1.810.326.1444 x204 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. --
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:ccie_rs- > [EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > Sent: Friday, April 04, 2008 5:51 PM > To: [email protected] > Subject: [OSL | CCIE_RS] lab 1, stuck already > > Hello > > I've just purchased the CCIE R&S selfstudy set ( lab book, proctor lab, cd > and dvd ) > > I'm really stuck at task 1.4 at Lab 1 and I feel a bit embarresed to not > get this rigth. > I cannot get connectivity between R1 and R2. ( not able to ping ) > > config for R1 ( C1812 in my lab ) > ! > interface FastEthernet0 > description link to R2 > ip address 150.50.17.1 255.255.255.0 > speed 100 > full-duplex > ! > > here is config for.R2 ( C1841 ) > ! > interface FastEthernet0/1 > ip address 150.50.17.2 255.255.255.0 > speed 100 > full-duplex > end > ! > ( don't know why but I can't insert the command "no switchport" on this > interface like the proctor tells me to do.) > > Her is config for SW1( 3550 ) in this lab: > ! > interface FastEthernet0/1 > description R1 port Fa0/0 towards R2 > switchport access vlan 100 > switchport mode dynamic desirable > duplex full > ! > interface FastEthernet0/2 > description R2 port Fa1/0 > switchport access vlan 12 > switchport mode dynamic desirable > duplex full > ! > > Hope I could get some help > > Kind Regards > > Rehman > >
