The Core Technology Labs (currnently 1-18 in Version 9) all use the same logical topology. So the diagrams are shared across those labs. In 19-40, there starts to be more variety in the connections and configurations there, so each lab has their own diagram. The PHYSICAL connections do not change. The logical configuration of those may change though. HTH, Scott
_____ From: Carlos Valero [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 08, 2008 8:21 PM To: Carlos Valero; [EMAIL PROTECTED]; [email protected] Subject: Re: [OSL | CCIE_RS] Questions about the Virtual Labs - Question No. 2 Question No. 2: In the Diagrams Book, page No. 4 is titled: "Standard Topology" Then page No. 5 is titled: "Labs 1-18" Both Diagrams seem to be pretty similar to me (other than the IP addresses) The question is: What exactly is the difference between these 2? What exactly does "Standard Topology" mean? I'm confused. Finally, what about Labs 19 - 40? Is there any "General Diagram" that would be used for these Labs? Or do these Labs need specific configurations for each one, so that they can't be generalized? Thank you! Carlos Valero <[EMAIL PROTECTED]> wrote: Hello, I'm pretty new to this Online Study List So I have several questions because I'm a bit confused: 1. What kind of Routers are BB1, BB2 and BB3? Routers R1 to R9 are 2811's. But I could not find anything about these BBn's I'll send the other questions in separate emails for easier handling. Thanks! Carlos Valero <[EMAIL PROTECTED]> wrote: What about 2620's? Will they be a better alternative to the 2811? What could be left out with 2620's if compared with the 2811's Thanks! Scott Morris <[EMAIL PROTECTED]> wrote: They'll be incredibly slow if you reboot them. :) Other than that, the core/basic stuff you'll do just fine in. Newer technologies, IPv6, some QoS and other things, you won't get all the details in. Are they a waste of time? No. But they won't cover everything, so you'll want to look at keeping this in mind with your study plan. Take a look at the Feature Navigator, and compare IOS images from the 2500 (whatever one you're using) and the 2801/2811 one that is being used. You'll see all the differences there to help you out! Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor A Cisco Learning Partner - We Accept Learning Credits! [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kambiz Agahian Sent: Saturday, February 09, 2008 8:20 AM To: [email protected] Subject: [OSL | CCIE_RS] 2811s in Ultimate Lab Preparation WB Hi guys, I was just wondering if possibly could deploy legacy 2520s instead of all those expensive 2811s. Are they able to be useful in 80-90% of our scenarios ? or they just start lagging from the beginning ? Cheers, _____ You rock. That's why Blockbuster's offering you one <http://us.rd.yahoo.com/evt=47523/*http://tc.deals.yahoo.com/tc/blockbuster/ text5.com> month of Blockbuster Total Access, No Cost. _____ You rock. That's why Blockbuster's offering you one <http://us.rd.yahoo.com/evt=47523/*http://tc.deals.yahoo.com/tc/blockbuster/ text5.com> month of Blockbuster Total Access, No Cost. _____ You rock. That's why Blockbuster's offering you one <http://us.rd.yahoo.com/evt=47523/*http://tc.deals.yahoo.com/tc/blockbuster/ text5.com> month of Blockbuster Total Access, No Cost.
