Carlos,
If you are an IPexpert (purchased our products legally and
aren't using a pirated copy) these files will ne found within your
IPexpert login / account. I've copied our support team on this.
Regards,
-Wayne
Wayne A. Lawson II, CCIE #5244
Founder & President - IPexpert, Inc.
Mailto: [EMAIL PROTECTED]
Cell: 810.278.1662
:: Message sent from iPhone
On Apr 8, 2008, at 9:51 PM, "Scott Morris" <[EMAIL PROTECTED]> wrote:
I believe the final configuration files should also be in your
IPexpert account/locker. If they are not, chat with support.
I think that's what you were asking!
Scott
From: Carlos Valero [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 08, 2008 8:26 PM
To: Carlos Valero; [EMAIL PROTECTED]; [email protected]
Subject: Re: [OSL | CCIE_RS] Questions about the Virtual Labs -
Question No. 3
Question No. 3:
The thin Book has the Diagrams and the thick Book has the solutions.
Now, are these solutions included in any of the CD's?
Or can they be downloaded from somewhere?
Or do we have no choice but to type each and every command when we
enter the Virtual Lab?
Thank you!
Carlos Valero <[EMAIL PROTECTED]> wrote:
Question No. 2:
In the Diagrams Book, page No. 4 is titled: "Standard Topology"
Then page No. 5 is titled: "Labs 1-18"
Both Diagrams seem to be pretty similar to me (other than the IP
addresses)
The question is: What exactly is the difference between these 2?
What exactly does "Standard Topology" mean? I'm confused.
Finally, what about Labs 19 - 40?
Is there any "General Diagram" that would be used for these Labs?
Or do these Labs need specific configurations for each one, so that
they can't be generalized?
Thank you!
Carlos Valero <[EMAIL PROTECTED]> wrote:
Hello,
I'm pretty new to this Online Study List
So I have several questions because I'm a bit confused:
1. What kind of Routers are BB1, BB2 and BB3?
Routers R1 to R9 are 2811's.
But I could not find anything about these BBn's
I'll send the other questions in separate emails for easier handling.
Thanks!
Carlos Valero <[EMAIL PROTECTED]> wrote:
What about 2620's?
Will they be a better alternative to the 2811?
What could be left out with 2620's if compared with the 2811's
Thanks!
Scott Morris <[EMAIL PROTECTED]> wrote:
They'll be incredibly slow if you reboot them. :)
Other than that, the core/basic stuff you'll do just fine in. Newer
technologies, IPv6, some QoS and other things, you won't
get all the details in. Are they a waste of time? No. But they
won't cover everything, so you'll want to look at keeping this in
mind with your study plan.
Take a look at the Feature Navigator, and compare IOS images from
the 2500 (whatever one you're using) and the 2801/2811 one that is
being used. You'll see all the differences there to help you out!
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
[EMAIL PROTECTED]
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
] On Behalf Of Kambiz Agahian
Sent: Saturday, February 09, 2008 8:20 AM
To: [email protected]
Subject: [OSL | CCIE_RS] 2811s in Ultimate Lab Preparation WB
Hi guys,
I was just wondering if possibly could deploy legacy 2520s instead
of all those expensive 2811s.
Are they able to be useful in 80-90% of our scenarios ? or they just
start lagging from the beginning ?
Cheers,
You rock. That's why Blockbuster's offering you one month of
Blockbuster Total Access, No Cost.
You rock. That's why Blockbuster's offering you one month of
Blockbuster Total Access, No Cost.
You rock. That's why Blockbuster's offering you one month of
Blockbuster Total Access, No Cost.
You
