One of the asks on ipexpert lab32 in the multicast
section was
"Ensure that configurations for future groups with a
different rendezvous point are easy"
The PG just says this is self-explanatory
I'm guessing the way to go about this requirment is
specifying ACL's like the FINAL CONFIGS shows where
they have "4" and "5" at the end of the static rp
mapping:
ip pim rp-address 100.0.0.6 4
ip pim rp-address 140.10.12.1 5
ip pim send-rp-announce FastEthernet0/0 scope 16
group-list 5
ip pim send-rp-discovery scope 16
My other question is why do two routers (R1 and R6)
have the command for "ip pim send-rp-discovery scope
16"?
that means we have two mapping agents?
Does that go back to the first requirement in the
beginning of this post?
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
