I agree with you timur. Let me change that and I will let you if it worked. I think match all is the default.
Suresh On Thu, Jun 12, 2008 at 9:11 PM, Timur Snoke <[EMAIL PROTECTED]> wrote: > I am not sure that this matters but I notice that all of your class-maps are > match-all and not match-any, I would revisit that. I think the class-map > TELSSH would only match on communication that used both SSH and Telnet ports > at the same time (which is rather infrequent I have been told). > > I did find a similar error at > http://www.cisco.com/en/US/tech/tk39/tk51/technologies_configuration_example09186a0080094c42.shtml > but > this was dealing with Per-VC QoS. what does the interface config that you > are trying to apply it to look like and what happens if you change the > bandwidth statements in the policy-maps to priority? > > Thoughts? > > Timur Snoke > > > ________________________________ >> Date: Thu, 12 Jun 2008 16:22:11 -0400 >> From: [EMAIL PROTECTED] >> To: [EMAIL PROTECTED]; [email protected] >> Subject: [OSL | CCIE_RS] LAB 17 task 9 >> >> Hello all, >> >> I am having trouble applying this policy map to ethernet interface. >> Can anyone explain me why? Is that somethging to do with IOS version >> >> ============================================================================ >> >> class-map match-all TELSSH >> match protocol telnet >> match protocol ssh >> class-map match-all FTP >> match protocol ftp >> match protocol secure-ftp >> class-map match-all EMAIL >> match protocol pop3 >> match protocol smtp >> match protocol imap >> match protocol secure-pop3 >> match protocol secure-imap >> class-map match-all WEB >> match protocol http >> ! >> ! >> policy-map CUSTOMTOMQC >> class TELSSH >> bandwidth percent 5 >> class FTP >> bandwidth percent 10 >> class EMAIL >> bandwidth percent 20 >> class WEB >> bandwidth percent 40 >> class class-default >> >> >> >> Enter configuration commands, one per line. End with CNTL/Z. >> R8(config)#int fa0/0 >> R8(config-if)#service-policy output CUSTOMTOMQC >> I/f FastEthernet0/0 class TELSSH requested bandwidth 5%, available only 0% >> R8(config-if)# >> >> >> >> ! >> ! > > > ________________________________ > Now you can invite friends from Facebook and other groups to join you on > Windows Live™ Messenger. Add them now!
