Hi group, I have two question regarding LAB26 frame-relay.
1. There is the task to configure the ser0/2/0 link between R2 and R5 with frame-relay RFC2427. Well, I configured the physical interface with frame-relay ietf. So I made a p-t-p subinterface and configured the frame-rel int dlci. Now, is it not necessary to also configure this interface dlci with ietf? ! interface Serial0/2/0 no ip address encapsulation frame-relay IETF no keepalive no frame-relay inverse-arp ! interface Serial0/2/0.2 point-to-point ip address 172.16.25.0 255.255.255.254 snmp trap link-status frame-relay de-group 1 25 frame-relay interface-dlci 25 IETF ! 2. A previous task requires us on R2 to mark everything above 512bytes with DE. The solution forgot to also apply this de-group to the Ser0/2/0 interface... regards Roger
