As a precaution, to run pretty much any 12.4 code on a 2600 you will need to max out the RAM and flash. I think you will need a 2600XM series to do it properly
On Tue, Jul 28, 2009 at 5:27 PM, Douglas Kuo <[email protected]> wrote: > thanks. I will download it. > > > > --- On Tue, 7/28/09, Kaj Niemi <[email protected]> wrote: > > > From: Kaj Niemi <[email protected]> > > Subject: Re: [OSL | CCIE_RS] IPv6 - no ipv6 dhcp.. commands > > To: "Douglas Kuo" <[email protected]> > > Cc: "ccie_rs" <[email protected]> > > Date: Tuesday, July 28, 2009, 2:14 PM > > Hi, > > > > > > You're running 12.3M - what you need is 12.3(4)T or later. > > See > > > http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html#w > > p1055847 > > > > Also, FN is your friend although sometimes it is a bit > > inaccurate. > > > > > > HTH > > > > Kaj > > > > > > > From: Douglas Kuo <[email protected]> > > > Date: Tue, 28 Jul 2009 14:06:32 -0700 > > > To: ccie_rs <[email protected]> > > > Subject: [OSL | CCIE_RS] IPv6 - no ipv6 dhcp.. > > commands > > > > > >> Hi all, > > >> > > >> I am doing my first ipv6 configuration and ran > > into a problem. I am using > > >> c2600-ik9o3s-mz.123-26.bin and there is no > > commands for anything begin with > > >> "ipv6 dhcp..." in either conf or > > interface. Any idea what is wrong? > > >> > > >> Thanks, > > >> Douglas > > > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
