Are these interfaces connected to the virtual frame switch? If they are I think Dynamips doesn't support it. Try like I said with back-to-back connections.
-- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Juniper JNCIA-ER & JNCIA-EX MCSA:Messaging, MCSE Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Tue, Aug 18, 2009 at 4:03 PM, Tahir Bashir <[email protected]>wrote: > > > Hi Rick, > > I have following configuration on my HUB Router for Multilink FR. But I m > getting mfr interface down and serial interfaces are also down. > > > interface MFR1 > ip address 100.100.100.2 255.255.255.0 > frame-relay map ip 100.100.100.2 204 > frame-relay map ip 100.100.100.4 204 broadcast > frame-relay map ip 100.100.100.5 205 broadcast > frame-relay map ip 100.100.100.6 206 broadcast > no frame-relay inverse-arp > ! > interface Serial1/0 > no ip address > encapsulation frame-relay MFR1 > serial restart-delay 0 > no arp frame-relay > ! > interface Serial1/1 > no ip address > encapsulation frame-relay MFR1 > serial restart-delay 0 > no arp frame-relay > > > > > Regards, > Tahir Bashir > > > ------------------------------ > Date: Tue, 18 Aug 2009 16:00:54 +0200 > Subject: Re: [OSL | CCIE_RS] Frame Relay MultiLink Problem > From: [email protected] > To: [email protected] > CC: [email protected] > > > Multilink Frame Relay means bundling frame-relay interfaces. You should > connect the serial interfaces to the FR switch as you normally would, but > the switch should support it. I don't know if Dynamips supports this, but > you can try the configuration using 2 or more back-to-back serial links. > Example: > ! > interface Serial0/1 > encapsulation frame-relay mfr 1 > no shutdown > ! > interface Serial0/2 > encapsulation frame-relay mfr 1 > no shutdown > ! > interface mfr1 > no keep-alive > no ip address > ! > interface mfr1.1 point-to-point > ip address 10.0.0.1 255.255.255.0 > frame-relay interface-dlci 101 > ! > > -- > Regards, > > Rick Mur > CCIE2 #21946 (R&S / Service Provider) > Juniper JNCIA-ER & JNCIA-EX > MCSA:Messaging, MCSE > Sr. Support Engineer – IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> > > > On Tue, Aug 18, 2009 at 2:58 PM, Tahir Bashir <[email protected]>wrote: > > Hi All, > > I am getting some problems in Multilink Frame Relay design on GNS3. My MFR > links are down. I would like to know the way how to connect the Multilink > with FR Switch and mapping entries in FR Switch. > > > > > > Regards, > > Tahir Bashir > > > ------------------------------ > check out the rest of the Windows Live™. More than mail–Windows Live™ goes > way beyond your inbox. More than > messages<http://www.microsoft.com/windows/windowslive/> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > > > > ------------------------------ > See all the ways you can stay connected to friends and > family<http://www.microsoft.com/windows/windowslive/default.aspx> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
