Wait a minute, your passive interface needs to be on the L3 interface participating in EIGRP on that 6509, not access layer port.
On 8/20/09 10:35 AM, "Louis S" <[email protected]> wrote: > THANKS ALL FOR THE LIVELY INPUT! > > Yes it does only advertise the main release info of the IOS version, > but from my prod network I can tell you even after passive-interface is turned > on for my computer's access port I can run wireshark and still see EIGRP > HELLO's > > 6509user-switch#sri gi 8/8 > Building configuration... > > Current configuration : 203 bytes > ! > interface GigabitEthernet8/8 > switchport > switchport access vlan 53 > switchport mode access > no cdp enable > spanning-tree portfast > spanning-tree bpdufilter enable > spanning-tree bpduguard enable > end > > 6509user-switchD#srbr eig > router eigrp 100 > passive-interface GigabitEthernet8/8 > network x > network x > no auto-summary > ! > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
