Hi All,
Thanks Bryan. May be the protocol is down or something strange is happening with his devices. I have simulated the same in GNS3 and without any hassle i have just landed on what is missing on his lab. Look at my attached verifications. Regards Cyrus CCNP,CCNA,CCDA,ARSFE,AWLANFE,Written RnS On 9/3/09, Bryan Bartik <[email protected]> wrote: > Ahmed, > > Is the f0/0 interface on R1 UP/UP? > > On Thu, Sep 3, 2009 at 2:45 AM, Ahmed Haji Munye <[email protected]> wrote: > >> >> >> *R1* >> >> s0/0 ip add 13.1.1.1 255.255.255.0 >> no shut >> loop1 1.1.1.1 255.255.255.0 >> loop2 2.1.2.1 255.255.255.0 >> int fa0/0 131.1.1.1 255.255.255.0 >> no shut >> >> router ospf 123 >> network 13.1.1.0 0.0.0.255 are 0 >> network 1.1.1.0 0.0.0.255 area 0 >> redistribute connected subnets >> >> *R3* >> >> int s0/1 ip add 13.1.1.3 255.255.255.0 >> clock rate 64000 >> no shut >> router ospf 123 >> network 13.1.1.0 0.0.0.255 area 0 >> >> The thinf is that I don´t see the routes from fa0/0 after I typed " >> redistribute connected subnet ", but I can see the 2.1.2.0 routes in R3s >> routing table. >> >> Why don´t I see the 131.1.1.0 routes in R3s routing table, what shall I do >> to solve this issue? >> >> Kind Regards >> Ahmed >> >> >> ------------------------------ >> Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling. >> Sök och jämför priser hos >> Kelkoo.<http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > > -- > Bryan Bartik > CCIE #23707 (R&S), CCNP > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
