Yes, check your type 1 LSAs by doing "show ip ospf database router" as Kaj said. Pipe it to include 2.3.4.5 if you like to get to the point : )
On Mon, Sep 7, 2009 at 4:34 PM, Kaj Niemi <[email protected]> wrote: > > Are you sure the loopback doesn't show up as a stub network with "show ip > ospf database router" to display type 1 LSAs? ;) > > > Kaj > > > > > From: Solomon Ayele <[email protected]> > > Date: Mon, 7 Sep 2009 13:24:53 -0700 > > To: CCIE OSL <[email protected]> > > Subject: [OSL | CCIE_RS] Advertising loopback interface in OSPF > > > > I have configured ospf on both routers and adjacency is established (R1 > is > > DR). I have configured "ip ospf 1 area 0" on both Fa and loopback > interfaces > > of R0 and Fa0/0 interface of R1. > > > > The strange thing is I do not see the loopback 1 (2.3.4.5) in ospf > database of > > R1 but I see it in the routing table as OSPF route. > > > > Do any of you have explanation? > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
