Jay, Why don't you lab it and see the real behavior? Terry did a pretty good job of explaining it.
On Sun, Sep 13, 2009 at 10:34 AM, Jay <[email protected]> wrote: > Hi All, > Just for clarification let me make sure I also understand. Cisco > technology handbook states "RIP uses a single routing metric (hop count) to > measure the distance between the source and a destination network. Each hop > in a path from source to destination is assigned a hop count value, which is > typically 1. When a router receives a routing update that contains a new or > changed destination network entry, the router adds 1 to the metric value > indicated in the update and enters the network in the routing table. The IP > address of the sender is used as the next hop. " > From that it seems to me that if RIP sends from R1 with a value of 10 , > R2 places in RIB with a value of 11, and sends upstream with a value of 11. > Does that seem accurate? I misread the replies initially and it made me > want to verify my understanding of the behavior. > > Thanks, > Jay Klus > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
