1) wget ' http://downloads.sourceforge.net/gns-3/GNS3-0.6.1-src.tar.gz?download'2) tar xvf GNS3-0.6.1-src.tar.gz 3) cd GNS3-0.6.1-src 4) sudo python setup.py install that's all.
2009/10/17 MANNY Omari <[email protected]> > > > Hello, i have Installed Ubuntu 8.x 64bit and i found GNS3 installtion on > Ubuntu 7.x “http://www.blindhog.net/gns3-installation-tutorial-for-linux/” > but the thing is that it doesn't show the location of Python-qt4 I'm just > stucked there, I have downloaded Python-qt4 but don't know where to paste > the file, i cannot paste file in filesystem if i take the properties > > permission it says “the permission of “/” determind. Any help please will be > highly appreciated. > > > Best Regards > > ------------------------------ > From: [email protected] > Date: Thu, 15 Oct 2009 21:16:28 -0700 > Subject: Fwd: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit > To: [email protected]; [email protected] > > Guys, > > Try these steps. Should be simple. Mine worked after just editing > sources.list and an update which included gns3 also. > -Duleep > > ---------- Forwarded message ---------- > From: *Justin Mitchell* <[email protected]> > Date: Thu, Oct 15, 2009 at 11:01 AM > Subject: Re: [OSL | CCIE_RS] GNS3 Installation on Ubuntu - 64bit > To: Duleep Pillai <[email protected]> > > > Follow the instructions here: http://gpl.code.de/oswiki/GplcodedeApt > > But use the following changes: > > Update your sources.list for Ubuntu > Append the following lines to your /etc/apt/sources.list: > > # gpl.code.de > deb http://gpl.code.de/ubuntu jaunty/ > deb-src http://gpl.code.de/ubuntu jaunty/ > > > Once you have made the changes, check for updates, you should get the > latest and greatest version that way. > > Justin G. Mitchell > http://www.google.com/profiles/jgmitchell > > > > On Thu, Oct 15, 2009 at 12:58 PM, Duleep Pillai <[email protected]> > wrote: > > Can you tell me how to do that? I tried update and it did not find any. > > > > Thanks, > > > > On Thu, Oct 15, 2009 at 10:29 AM, Justin Mitchell <[email protected]> > > wrote: > >> > >> Make sure you install the updates from the GNS3 site. I had the same > >> problems until I installed them. > >> > >> Justin G. Mitchell > >> Sent from my G1 mobile phone > >> > >> On Oct 15, 2009 12:02 PM, "Duleep Pillai" <[email protected]> > wrote: > >> > >> Hi All, > >> > >> Sorry for asking the same question again. Could not find a solution for > >> this in the archives. > >> > >> I just installed a 64bit Ubuntu and am trying to run gns3. I cannot open > >> the .net file pasted below (which is a customized IPExpert file). There > is > >> no error message. However, the same file is working on a 32 bit > installation > >> on a different machine. > >> > >> I can create a new project, but unable to save it either. Is there any > >> permissions issue which I missed? I used the default installation > process > >> for Ubuntu and "sudo apt-get install gns3" for installing GNS3. > >> > >> > >> Thanks, > >> Duleep > >> > >> autostart = False > >> [localhost:7202] > >> workingdir = /home/duleep/DYNAMIPS/Working > >> udp = 10200 > >> [[3725]] > >> ghostios = True > >> image = > >> > /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked > >> ram = 256 > >> sparsemem = True > >> idlepc = 0x614ab070 > >> [[ROUTER R6]] > >> model = 3725 > >> console = 2006 > >> idlepc = 0x614ab0cc > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R6.cfg > >> s0/1 = FR-Switch 6 > >> f0/0 = Cat2 f1/6 > >> f0/1 = Cat4 f1/6 > >> slot2 = NM-4T > >> s2/0 = R9 s2/0 > >> s2/1 = R9 s2/1 > >> x = 48.0 > >> y = -37.0 > >> [[ROUTER R7]] > >> model = 3725 > >> console = 2007 > >> idlepc = 0x6026b438 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R7.cfg > >> s0/0 = R8 s0/0 > >> f0/0 = Cat2 f1/7 > >> f0/1 = Cat4 f1/7 > >> x = -103.0 > >> y = 365.0 > >> [[ROUTER R8]] > >> model = 3725 > >> console = 2008 > >> idlepc = 0x62b200d8 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R8.cfg > >> s0/0 = R7 s0/0 > >> f0/0 = Cat2 f1/8 > >> f0/1 = Cat4 f1/8 > >> x = -304.0 > >> y = 359.0 > >> [[ROUTER R9]] > >> model = 3725 > >> console = 2009 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R9.cfg > >> f0/0 = Cat2 f1/9 > >> f0/1 = Cat4 f1/9 > >> slot2 = NM-4T > >> s2/0 = R6 s2/0 > >> s2/1 = R6 s2/1 > >> x = 261.0 > >> y = 331.0 > >> [localhost:7203] > >> workingdir = /home/duleep/DYNAMIPS/Working > >> udp = 10300 > >> [[3725]] > >> ghostios = True > >> image = > >> > /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked > >> ram = 256 > >> sparsemem = True > >> idlepc = 0x60c06d20 > >> [[ROUTER Cat1]] > >> model = 3725 > >> console = 2010 > >> idlepc = 0x60c059a8 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat1.cfg > >> slot1 = NM-16ESW > >> f1/0 = Cat2 f1/0 > >> f1/1 = R1 f0/0 > >> f1/2 = R2 f1/0 > >> f1/4 = R4 f0/0 > >> f1/5 = R5 f0/0 > >> f1/9 = BB1 e0/0 > >> f1/10 = Cat4 f1/10 > >> f1/11 = Cat4 f1/11 > >> f1/12 = Cat3 f1/12 > >> f1/13 = Cat3 f1/13 > >> f1/14 = Cat2 f1/14 > >> f1/15 = Cat2 f1/15 > >> x = -35.0 > >> y = 95.0 > >> [[ROUTER Cat2]] > >> model = 3725 > >> console = 2014 > >> idlepc = 0x6026b804 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat2.cfg > >> slot1 = NM-16ESW > >> f1/0 = Cat1 f1/0 > >> f1/1 = R1 f0/1 > >> f1/2 = BB2 e0/0 > >> f1/3 = BB3 e0/0 > >> f1/6 = R6 f0/0 > >> f1/7 = R7 f0/0 > >> f1/8 = R8 f0/0 > >> f1/9 = R9 f0/0 > >> f1/10 = Cat3 f1/10 > >> f1/11 = Cat3 f1/11 > >> f1/12 = Cat4 f1/12 > >> f1/13 = Cat4 f1/13 > >> f1/14 = Cat1 f1/14 > >> f1/15 = Cat1 f1/15 > >> x = -39.0 > >> y = 227.0 > >> [[ROUTER Cat3]] > >> model = 3725 > >> console = 2015 > >> idlepc = 0x62b22904 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat3.cfg > >> slot1 = NM-16ESW > >> f1/2 = R2 f1/1 > >> f1/4 = R4 f0/1 > >> f1/5 = R5 f0/1 > >> f1/10 = Cat2 f1/10 > >> f1/11 = Cat2 f1/11 > >> f1/12 = Cat1 f1/12 > >> f1/13 = Cat1 f1/13 > >> f1/14 = Cat4 f1/14 > >> f1/15 = Cat4 f1/15 > >> x = -211.0 > >> y = 91.0 > >> [[ROUTER Cat4]] > >> model = 3725 > >> console = 2016 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/Cat4.cfg > >> slot1 = NM-16ESW > >> f1/6 = R6 f0/1 > >> f1/7 = R7 f0/1 > >> f1/8 = R8 f0/1 > >> f1/9 = R9 f0/1 > >> f1/10 = Cat1 f1/10 > >> f1/11 = Cat1 f1/11 > >> f1/12 = Cat2 f1/12 > >> f1/13 = Cat2 f1/13 > >> f1/14 = Cat3 f1/14 > >> f1/15 = Cat3 f1/15 > >> x = -212.0 > >> y = 224.0 > >> [localhost:7201] > >> workingdir = /home/duleep/DYNAMIPS/Working > >> udp = 10100 > >> [[3725]] > >> ghostios = True > >> image = > >> > /home/duleep/DYNAMIPS/IMAGES/c3725-adventerprisek9-mz.124-15.T10.bin.unpacked > >> ram = 256 > >> sparsemem = True > >> idlepc = 0x60c05928 > >> [[ROUTER R4]] > >> model = 3725 > >> console = 2004 > >> idlepc = 0x614ac21c > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R4.cfg > >> s0/1 = FR-Switch 4 > >> f0/0 = Cat1 f1/4 > >> f0/1 = Cat3 f1/4 > >> x = 48.0 > >> y = -149.0 > >> [[ROUTER R5]] > >> model = 3725 > >> console = 2005 > >> idlepc = 0x62b22904 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R5.cfg > >> s0/1 = FR-Switch 5 > >> s0/2 = R2 s0/2 > >> f0/0 = Cat1 f1/5 > >> f0/1 = Cat3 f1/5 > >> x = -336.0 > >> y = -28.0 > >> [[ROUTER R1]] > >> model = 3725 > >> console = 2001 > >> idlepc = 0x62b200d8 > >> cnfg =/home/duleep/DYNAMIPS/Startup_Configs/R1.cfg > >> f0/0 = Cat1 f1/1 > >> f0/1 = Cat2 f1/1 > >> x = 91.0 > >> y = 163.0 > >> [[ROUTER R2]] > >> model = 3725 > >> console = 2002 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/R2.cfg > >> s0/1 = FR-Switch 2 > >> s0/2 = R5 s0/2 > >> slot1 = NM-16ESW > >> f1/0 = Cat1 f1/2 > >> f1/1 = Cat3 f1/2 > >> x = -333.0 > >> y = -169.0 > >> [localhost:7204] > >> workingdir = /home/duleep/DYNAMIPS/Working > >> udp = 10400 > >> [[2610]] > >> image = > >> /home/duleep/DYNAMIPS/IMAGES/c2600-jk9s-mz.122-23.bin.unpacked > >> idlepc = 0x803d0d18 > >> ghostios = True > >> sparsemem = True > >> chassis = 2610 > >> [[FRSW FR-Switch]] > >> 2:204 = 4:402 > >> 2:205 = 5:502 > >> 2:206 = 6:602 > >> 2:214 = 4:412 > >> 2:215 = 5:512 > >> 2:216 = 6:612 > >> 2:224 = 4:422 > >> 2:225 = 5:522 > >> 2:226 = 6:622 > >> 4:402 = 2:204 > >> 4:405 = 5:504 > >> 4:406 = 6:604 > >> 4:412 = 2:214 > >> 4:415 = 5:514 > >> 4:416 = 6:614 > >> 4:422 = 2:224 > >> 4:425 = 5:524 > >> 4:426 = 6:624 > >> 5:502 = 2:205 > >> 5:504 = 4:405 > >> 5:506 = 6:605 > >> 5:512 = 2:215 > >> 5:514 = 4:415 > >> 5:516 = 6:615 > >> 5:522 = 2:225 > >> 5:524 = 4:425 > >> 5:526 = 6:625 > >> 6:602 = 2:206 > >> 6:604 = 4:406 > >> 6:605 = 5:506 > >> 6:612 = 2:216 > >> 6:614 = 4:416 > >> 6:615 = 5:516 > >> 6:622 = 2:226 > >> 6:624 = 4:426 > >> 6:625 = 5:526 > >> x = -159.5 > >> y = -91.5 > >> [[ROUTER BB3]] > >> model = 2610 > >> console = 2013 > >> idlepc = 0x802f9ab4 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB1.cfg > >> e0/0 = Cat2 f1/3 > >> x = 9.0 > >> y = 365.0 > >> [[ROUTER BB2]] > >> model = 2610 > >> console = 2012 > >> idlepc = 0x802f9a80 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB2.cfg > >> e0/0 = Cat2 f1/2 > >> x = 137.0 > >> y = 366.0 > >> [[ROUTER BB1]] > >> model = 2610 > >> console = 2011 > >> cnfg = /home/duleep/DYNAMIPS/Startup_Configs/BB3.cfg > >> e0/0 = Cat1 f1/9 > >> x = 255.0 > >> y = 85.0 > >> [GNS3-DATA] > >> configs = /home/duleep/DYNAMIPS/Startup_Configs > >> workdir = /home/duleep/DYNAMIPS/Working > >> m11 = 0.5 > >> m22 = 0.5 > >> > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please > >> visit www.ipexpert.com > >> > > > > > > > ------------------------------ > Windows Live Hotmail: Your friends can get your Facebook updates, right > from > Hotmail®.<http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_4:092009> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- With best regards, Andrey 'sshd' Petrenko xmmp: sshd at jabber.org gtalk: andy.petrenko at gmail.com skype: andy.petrenko web: http://sshd.by
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
