Oh, cool. Thanks for the tip. I will try it out today! On Thu, Nov 12, 2009 at 2:41 AM, Bryan Bartik <[email protected]> wrote:
> Erik, > > Remove the scheduler allocate commands from the initial config. I think > these cause it to lock up. > > On Mon, Nov 9, 2009 at 3:50 AM, Erik Fairbanks <[email protected]>wrote: > >> All, I can't seem to get my R2 on Volume 2 Lab 2 to keep from locking >> up. It runs fine for a while, but when I randomly issue "sho run" on the >> device, the CPU utilization on the host machine shoots to 100% and the >> router just hangs and the command never completes. I have tried numerous >> idlepc values, but none of them seem to fix the problem. I have also tried >> running the router in its own hypervisor and have also cleaned out the >> working directory. None of the other routers have this problem and the all >> have the same idlepc values (with the exception of R2, which I keep >> tweeking). >> >> I am running dynamips with dynagen on Ubuntu 9.10. >> >> Any assistance/ideas would be greatly appreciated! >> >> Thanks in advance. >> >> -Erik >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > > -- > Bryan Bartik > CCIE #23707 (R&S, SP), CCNP > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
