Basically I want to generate traffic on GNS3 ..so that I can check QoS practicals and link utilization.
On Mon, Dec 21, 2009 at 2:23 PM, Taqdir Singh <[email protected]>wrote: > > I'm trying to find information on how to use TTCP and enter the right > information in order to find the throughput > the speed of a 1.5 Mbps link. The test > will be taken from router to router but am not sure on which settings (or > should i use default settings ex: nbuffers 2048 , buflen 8192 etc..)and > how to calculate the readings > properly in order to get an accurate reading. I have alreacdy checked below > documents > but am still a little confused on how to do this and get accurate results > and how to enter the right configurations and which numbers to use . > > > http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009 > > -- > Taqdir Singh > Network Engineer > (+91) 991-170-9496 > (+91) 801-041-5988 > > > Do not let what you can not do to stop you from doing what you can do > -- Taqdir Singh Network Engineer (+91) 991-170-9496 (+91) 801-041-5988 Do not let what you can not do to stop you from doing what you can do
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
