The only thing you can really do there Frank is look at a "show spanning-tree" and take a look at your STP port types. If you see a port designated at a "boundary" port it means you are on a switch that is at the edge of an MST region and your neighbor is in another region.
On Tue, Jan 26, 2010 at 9:55 AM, Frank <[email protected]> wrote: > > Hi All, > > This lab completed without too much trouble. I did not know that > 224.0.0.102 was also used by HSRPv2, so I tried to do it with GLBP and > failed of course... However, this an easy lesson learned. > > One thing, that I could some pointers on though: how to debug the MST > regions. On Cat3 I made an error and accidentally typed "revision 11" > instead of "revision 1" and hence that switch did not make it in the MST > region. I took me some time to find this; and I was wondering if there > are show/debug commands that could have helped me with this; like some > command that would show me easily what devices are in the MST region. > Any pointers? > > Regards, > > Frank > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > -- Regards, Joe Astorino CCIE #24347 (R&S) Sr. Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
