Thanks guys. Just testing this out on dynamips with 12.4(15)T11 but I think
I'm running into a code problem. The origin code changes to egp fine but the
ASN specified doesn't get appended onto the AS path. I'll test it out
tonight on a rack.

r1#sh route-map
route-map origin, permit, sequence 10
  Match clauses:
  Set clauses:
    origin egp 100

r2#sh ip bgp

   Network          Next Hop            Metric LocPrf Weight Path
*> 11.11.11.11/32   10.1.1.1                 0             0 100 11111 11222
e


On Thu, Jan 28, 2010 at 2:30 AM, Joe Astorino <[email protected]>wrote:

> P.S.
>
> It has just been brought to my attention that the feature is
> there...sort of : ) It is one of those friendly little hidden commands
> in IOS 12.4.24T1.  Irritating, I know.  12.4.24T2 brings it back into
> IOS help.
>
> On Thu, Jan 28, 2010 at 2:28 AM, Joe Astorino <[email protected]>
> wrote:
> > Ahhhhhhhhhh yes -- Having looked at this again, now I remember why it
> > was removed.  It was because on the version of code in proctorlabs
> > (12.4.24T1) this option does not exist in the route-map.  When I was
> > recording the video I could NOT implement the feature, so it was
> > removed.  Nevertheless, Tyson is still right in that you can do it
> > with the right IOS
> >
> > R1(config-subif)#route-map foo
> > R1(config-route-map)#set ori
> > R1(config-route-map)#set origin ?
> >  igp         local IGP
> >  incomplete  unknown heritage
> >
> > R1(config-route-map)#set origin igp ?
> >  <cr>
> >
> >
> > On Thu, Jan 28, 2010 at 2:25 AM, Joe Astorino <[email protected]>
> wrote:
> >> Ooops.  Sorry for the miscommunication.  I concede -- Tyson is right.
> >>
> >> On Thu, Jan 28, 2010 at 1:52 AM, Tyson Scott <[email protected]>
> wrote:
> >>> All,
> >>>
> >>> This is not a mistake.  You use the following to set the origin AS.
> >>>
> >>> route-map eBGP permit 10
> >>>  set origin egp 10101
> >>>
> >>> Just the same as set origin igp or incomplete are other options.
> >>>
> >>> Regards,
> >>>
> >>> Tyson Scott - CCIE #13513 R&S, Security, and SP
> >>> Technical Instructor - IPexpert, Inc.
> >>> Mailto: [email protected]
> >>> Telephone: +1.810.326.1444, ext. 208
> >>> Live Assistance, Please visit: www.ipexpert.com/chat
> >>> eFax: +1.810.454.0130
> >>>
> >>> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
> (R&S,
> >>> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security &
> Service
> >>> Provider) Certification Training with locations throughout the United
> >>> States, Europe and Australia. Be sure to check out our online
> communities at
> >>> www.ipexpert.com/communities and our public website at
> www.ipexpert.com
> >>>
> >>>
> >>> -----Original Message-----
> >>> From: [email protected]
> >>> [mailto:[email protected]] On Behalf Of Joe Astorino
> >>> Sent: Thursday, January 28, 2010 12:31 AM
> >>> To: Steve Shaw
> >>> Cc: CCIE OSL; LJ
> >>> Subject: Re: [OSL | CCIE_RS] WB1 Lab 13.3
> >>>
> >>> Hey Steve,
> >>>
> >>> Your first question was an issue with the lab -- in short, asking you
> >>> to make it appear as if it originated in AS 10101 didn't make any
> >>> sense.  That part of the task has been removed in the newest updates
> >>> which will be released sometime in the next few weeks.
> >>>
> >>> Secondly, the rule is if it is not prevented it is fair game so your
> >>> solution here is just fine : )
> >>>
> >>> On Wed, Jan 27, 2010 at 9:19 AM, Steve Shaw <[email protected]> wrote:
> >>>> I fought through this lab last night and there were two tasks that I
> had
> >>>> some questions on:
> >>>>
> >>>> Task 13.9 "These loopbacks should appear in other AS's as if they
> passed
> >>>> through AS 11111, AS 11222, AS 11333 and AS 11444, originating in AS
> >>> 10101."
> >>>>
> >>>> My only option of artifically modifying the AS-path is through
> prepending
> >>> on
> >>>> an ebgp link. But if I do this, the routes will appear to have passed
> >>>> through the proper ASNs but AS 10101 will show up last (far left) in
> the
> >>>> as-path attribute and not first (far right).
> >>>>
> >>>> Task 13.22 - I looked in the proctor guide specifically for this task
> and
> >>>> got the peering between R5,R6, and R7 via loopbacks correct but the
> >>> proctor
> >>>> guide also has a fix to prefer the dmz network between R8 and Cat1
> since
> >>>> that network is being learned (and preferred) via eBGP on R7 and
> recursive
> >>>> next-hop resolution is failing.
> >>>>
> >>>> My question on this one is I used next-hop-self between R7 and R8
> earlier
> >>> in
> >>>> the lab to avoid any next-hop resolution problems later on. I don't
> see
> >>> any
> >>>> requirement preventing this. Is using next-hop-self a valid fix for
> this
> >>>> situation?
> >>>>
> >>>> I'm going to review the entire lab today with the proctor guide so I'm
> >>> sure
> >>>> a couple more questions may pop up.
> >>>>
> >>>>
> >>>> On Tue, Jan 26, 2010 at 9:33 AM, LJ <[email protected]> wrote:
> >>>>>
> >>>>> excellent! it is so refreshing not to have to look at unfinished
> worbooks
> >>>>> with errors 10x told at the vendor but not solved.. and with promises
> of
> >>>>> fixing and finalizing but not done... I am so happy that ipexpert
> saved
> >>> me
> >>>>> from this :D
> >>>>>
> >>>>> On Tue, 26 Jan 2010 09:41:24 -0500
> >>>>>  Joe Astorino <[email protected]> wrote:
> >>>>> : Thats exactly right.  The diagrams are currently being revised
> which
> >>>>> : is the last step of our process.  As soon as those are done we will
> be
> >>>>> : releasing updates to you guys which will include
> >>>>> :
> >>>>> : 1) Revision to the WB
> >>>>> : 2) Revision to the DSG
> >>>>> : 3) All new startup/final configurations that have been scrubbed for
> >>>>> : errors and made much more "friendly" for you : )
> >>>>> :
> >>>>> : On Tue, Jan 26, 2010 at 9:25 AM, LJ <[email protected]> wrote:
> >>>>> :> and also the revised wb1 and the dsg wb right?
> >>>>> :>
> >>>>> :> On Tue, 26 Jan 2010 09:35:09 -0500
> >>>>> :>  Joe Astorino <[email protected]> wrote:
> >>>>> :> : Totally awesome that I just fired up my video solution sitting
> on my
> >>>>> :> : hard drive to see what it was you were talking about in this
> task :
> >>> )
> >>>>> :> : and it will be available to the masses SOON.  VERY soon : )
> >>>>> :> : : On Tue, Jan 26, 2010 at 9:33 AM, Joe Astorino
> >>>>> <[email protected]>
> >>>>> :> wrote:
> >>>>> :> :> It is correct and will likely haunt you : )  Seriously though,
> if
> >>>>> you
> >>>>> :> :> can't get it let me know and we will go over it!!!
> >>>>> :> :>
> >>>>> :> :> On Tue, Jan 26, 2010 at 9:22 AM, Steve Shaw <[email protected]>
> >>>>> wrote:
> >>>>> :> :>> Guys,
> >>>>> :> :>>
> >>>>> :> :>> Task 13.3 asks you to advertise multiple interfaces into BGP
> on
> >>>>> :> different
> >>>>> :> :>> speakers with the restriction of:
> >>>>> :> :>>
> >>>>> :> :>> "No ""neighbor"" commands may be used to assist any of these
> >>>>> networks"
> >>>>> :> :>>
> >>>>> :> :>> Is this a typo and should be no "network" commands or is this
> >>>>> correct
> >>>>> :> and
> >>>>> :> :>> going to haunt me the entire lab? (Please be a typo)
> >>>>> :> :>>
> >>>>> :> :>> Thanks,
> >>>>> :> :>>
> >>>>> :> :>> Steve
> >>>>> :> :>>
> >>>>> :> :>> _______________________________________________
> >>>>> :> :>> For more information regarding industry leading CCIE Lab
> training,
> >>>>> :> please
> >>>>> :> :>> visit www.ipexpert.com
> >>>>> :> :>>
> >>>>> :> :>>
> >>>>> :> :>
> >>>>> :> :>
> >>>>> :> :>
> >>>>> :> :> --
> >>>>> :> :> Regards,
> >>>>> :> :>
> >>>>> :> :> Joe Astorino CCIE #24347 (R&S)
> >>>>> :> :> Sr. Technical Instructor - IPexpert
> >>>>> :> :> Mailto: [email protected]
> >>>>> :> :> Telephone: +1.810.326.1444
> >>>>> :> :> Live Assistance, Please visit: www.ipexpert.com/chat
> >>>>> :> :> eFax: +1.810.454.0130
> >>>>> :> :>
> >>>>> :> :> IPexpert is a premier provider of Classroom and Self-Study
> Cisco
> >>>>> CCNA
> >>>>> :> :> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> >>>>> :> :> Security & Service Provider) Certification Training with
> locations
> >>>>> :> :> throughout the United States, Europe and Australia. Be sure to
> >>> check
> >>>>> :> :> out our online communities at www.ipexpert.com/communities and
> our
> >>>>> :> :> public website at www.ipexpert.com
> >>>>> :> :>
> >>>>> :> : : : : --
> >>>>> :> : Regards,
> >>>>> :> : : Joe Astorino CCIE #24347 (R&S)
> >>>>> :> : Sr. Technical Instructor - IPexpert
> >>>>> :> : Mailto: [email protected]
> >>>>> :> : Telephone: +1.810.326.1444
> >>>>> :> : Live Assistance, Please visit: www.ipexpert.com/chat
> >>>>> :> : eFax: +1.810.454.0130
> >>>>> :> : : IPexpert is a premier provider of Classroom and Self-Study
> Cisco
> >>>>> CCNA
> >>>>> :> : (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> >>>>> :> : Security & Service Provider) Certification Training with
> locations
> >>>>> :> : throughout the United States, Europe and Australia. Be sure to
> check
> >>>>> :> : out our online communities at www.ipexpert.com/communities and
> our
> >>>>> :> : public website at www.ipexpert.com
> >>>>> :> : _______________________________________________
> >>>>> :> :For more information regarding industry leading CCIE Lab
> training,
> >>>>> please
> >>>>> :> visit www.ipexpert.com
> >>>>> :>
> >>>>> :>
> >>>>> :
> >>>>> :
> >>>>> :
> >>>>> : --
> >>>>> : Regards,
> >>>>> :
> >>>>> : Joe Astorino CCIE #24347 (R&S)
> >>>>> : Sr. Technical Instructor - IPexpert
> >>>>> : Mailto: [email protected]
> >>>>> : Telephone: +1.810.326.1444
> >>>>> : Live Assistance, Please visit: www.ipexpert.com/chat
> >>>>> : eFax: +1.810.454.0130
> >>>>> :
> >>>>> : IPexpert is a premier provider of Classroom and Self-Study Cisco
> CCNA
> >>>>> : (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> >>>>> : Security & Service Provider) Certification Training with locations
> >>>>> : throughout the United States, Europe and Australia. Be sure to
> check
> >>>>> : out our online communities at www.ipexpert.com/communities and our
> >>>>> : public website at www.ipexpert.com
> >>>>> : _______________________________________________
> >>>>> :For more information regarding industry leading CCIE Lab training,
> >>> please
> >>>>> visit www.ipexpert.com
> >>>>>
> >>>>> _______________________________________________
> >>>>> For more information regarding industry leading CCIE Lab training,
> please
> >>>>> visit www.ipexpert.com
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>> --
> >>> Regards,
> >>>
> >>> Joe Astorino CCIE #24347 (R&S)
> >>> Sr. Technical Instructor - IPexpert
> >>> Mailto: [email protected]
> >>> Telephone: +1.810.326.1444
> >>> Live Assistance, Please visit: www.ipexpert.com/chat
> >>> eFax: +1.810.454.0130
> >>>
> >>> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
> >>> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> >>> Security & Service Provider) Certification Training with locations
> >>> throughout the United States, Europe and Australia. Be sure to check
> >>> out our online communities at www.ipexpert.com/communities and our
> >>> public website at www.ipexpert.com
> >>> _______________________________________________
> >>> For more information regarding industry leading CCIE Lab training,
> please
> >>> visit www.ipexpert.com
> >>>
> >>>
> >>
> >>
> >>
> >> --
> >> Regards,
> >>
> >> Joe Astorino CCIE #24347 (R&S)
> >> Sr. Technical Instructor - IPexpert
> >> Mailto: [email protected]
> >> Telephone: +1.810.326.1444
> >> Live Assistance, Please visit: www.ipexpert.com/chat
> >> eFax: +1.810.454.0130
> >>
> >> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
> >> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> >> Security & Service Provider) Certification Training with locations
> >> throughout the United States, Europe and Australia. Be sure to check
> >> out our online communities at www.ipexpert.com/communities and our
> >> public website at www.ipexpert.com
> >>
> >
> >
> >
> > --
> > Regards,
> >
> > Joe Astorino CCIE #24347 (R&S)
> > Sr. Technical Instructor - IPexpert
> > Mailto: [email protected]
> > Telephone: +1.810.326.1444
> > Live Assistance, Please visit: www.ipexpert.com/chat
> > eFax: +1.810.454.0130
> >
> > IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
> > (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> > Security & Service Provider) Certification Training with locations
> > throughout the United States, Europe and Australia. Be sure to check
> > out our online communities at www.ipexpert.com/communities and our
> > public website at www.ipexpert.com
> >
>
>
>
> --
> Regards,
>
> Joe Astorino CCIE #24347 (R&S)
> Sr. Technical Instructor - IPexpert
> Mailto: [email protected]
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA
> (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice,
> Security & Service Provider) Certification Training with locations
> throughout the United States, Europe and Australia. Be sure to check
> out our online communities at www.ipexpert.com/communities and our
> public website at www.ipexpert.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to