I worked on WBK lab 21 and 22 and realized that there are some misleading
initial configuration errors there:
- Lab 21 : I could not ping R7's FE interfaces from R5 and R6 simply because
the F0/7 on CAT2 and CAT4 were not on the right vlan
- Lab 22 : there is no GE on vlan 12 as the solution WBK said
Cat3550-1(config-pmap-c)#do sh int status | in 12
Fa0/1 R1 port Fa0/0 towa connected 12 a-full a-100 10/100BaseTX
Fa0/2 R2 port Fa1/0 connected 12 a-full a-100 10/100BaseTX
Fa0/12 notconnect 1 auto auto 10/100BaseTX
I appreciate all the efforts you are making to provide the best training
material we could have, please don't forget to clean these minor typo.
Patrice Ngassam
Solutions Architech, Telus Inc.
Ceritified Cisco CCNP, CCDP, CCIP
_________________________________________________________________
Nouveau ! Tout Windows Live débarque dans votre téléphone. Voir les Windows
phone
http://clk.atdmt.com/FRM/go/175819071/direct/01/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
