Can someone shed some lighy here?
The command "bgp bestpath as-path ignore" required in this task, does not
show up in the CLI, is rejected by the router, but if someone keeps insisting
and write the full command the box takes it.!!! see below.
IPeR7(config-router)#bgp best
IPeR7(config-router)#bgp bestpath ?
compare-routerid Compare router-id for identical EBGP paths
cost-community cost community
med MED attribute
IPeR7(config-router)#bgp bestpath as-path ?
% Unrecognized command
IPeR7(config-router)#bgp bestpath as-path ignore ?
% Unrecognized command
IPeR7(config-router)#bgp bestpath as-path ignore
VERIFICATION:
IPeR7(config-router)#do sh run | b router bgp
router bgp 7
no synchronization
bgp log-neighbor-changes
bgp bestpath as-path ignore
neighbor 10.0.0.5 remote-as 30
neighbor 10.0.0.5 ebgp-multihop 255
neighbor 10.0.0.5 update-source Loopback1
neighbor 10.0.0.6 remote-as 30
neighbor 10.0.0.6 ebgp-multihop 255
neighbor 10.0.0.6 update-source Loopback1
no auto-summary
Checking the IOS version...
IPeR7(config-router)#do sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(24)T1, RELEASE SOFTWARE (fc3
Any comments?
thanks
bauke
__________________________________________________________________
Be smarter than spam. See how smart SpamGuard is at giving junk email the boot
with the All-new Yahoo! Mail. Click on Options in Mail and switch to New Mail
today or register for free at http://mail.yahoo.ca_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
