Some basic troubleshooting --

1) Is the physical serial interface down/down?
2) Have you made any changes at all on the router end?  Any clocking,
encapsulation, LMI changes?

Deleted will usually indicate that you are specifying a DLCI in a
frame-relay inerface-dlci command but you have not received that DLCI from
the frame switch via LMI.  I noticed all your sub-interfaces were down/down
though and not up/down so I am wondering if you have even L1
connectivity????

It could be something as simple as a loose/bad serial cable.  I doubt it has
anything to do with the frame-relay switch configurations as that never
changes or is touched.  It smells more physical to me.  At any rate, I am
100% confident support can take care of this issue, and if you had a
physical problem you will be compensated with rack time I'm sure.



On Thu, Mar 11, 2010 at 1:45 AM, Joe Astorino <[email protected]>wrote:

> Hi Patrice,
>
> The frame-relay switch is not accessible in proctor labs racks, but
> configuring a frame-relay switch should definitely be something you cover in
> your studies.  As far as your problem, usually a status of DELETED means you
> have a DLCI configured that the frame-switch does not have, so I agree with
> you.   All of our frame-relay switches are configured the same way which is
> a standard full mesh of 3 PVCs between every router.
>
> Did you reach out to support??? Usually they are very responsive to these
> sorts of issues and I am sure they can check your frame-relay switch out.  I
> will copy them on this to get the ball rolling.  Sorry for your troubles.
>
>
>
> On Thu, Mar 11, 2010 at 1:38 AM, Patrice Ngassam <[email protected]>wrote:
>
>>  Hi,
>> I am currently working on  Volume 1 - Lab 30 and I am stuck with basic L1
>> issue. It appears that IPexpert has not provisioned their frame-relay switch
>> accordingly. The configuration of that frame-relay switch is it part of the
>> lab? Again, I had to stop my Lab for unforeseen circumtances.
>>
>> was working on pod pod112ts1.proctorlabs.com between 00:00 and 7:45 ET
>>
>> *R2(config-subif)#do sh frame-relay pvc | in DELETE
>> DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE =
>> Serial0/1/0.24
>>
>> DLCI = 105, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE =
>> Serial0/1/0.25
>> DLCI = 106, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE =
>> Serial0/1/0.26*
>>
>>
>> *R2(config-subif)#do sh ip int br | exc unass
>> Interface                  IP-Address      OK? Method
>> Status                Prot
>> ocol
>> Serial0/1/0.24             150.50.24.2     YES manual
>> down                  down
>>
>> Serial0/1/0.25             150.50.25.2     YES manual
>> down                  down
>>
>> Serial0/1/0.26             150.50.26.2     YES manual
>> down                  down
>>
>> Loopback0                  200.0.0.2       YES manual
>> up                    up
>>
>> Loopback1                  2.2.2.2         YES manual
>> up                    up
>> *
>> I've tryied a couple of shut-no shut on physical and logical
>> sub-interfaces with no luck.
>>
>> 1+1 = 2.
>>
>> *Patrice Ngassam*
>> *Ceritified Cisco CCNP, CCDP, CCIP*
>>
>>
>>
>>
>>
>> ------------------------------
>> Envie de naviguer sur Internet sans laisser de trace? La solution avec
>> Internet Explorer 8 <http://clk.atdmt.com/FRM/go/207186970/direct/01/>
>> ------------------------------
>> Acheter en ligne en toute sécurité ? Internet Explorer 8 vous protège
>> gratuitement ! <http://clk.atdmt.com/FRM/go/206608211/direct/01/>
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
>
> --
> Regards,
>
>
>
> Joe Astorino - CCIE #24347
> Sr. Technical Instructor - IPexpert
> Mailto: [email protected]
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> training locations throughout the United States, Europe, South Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>



-- 
Regards,



Joe Astorino - CCIE #24347
Sr. Technical Instructor - IPexpert
Mailto: [email protected]
Telephone: +1.810.326.1444
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130

IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
CCIE (R&S, Voice, Security & Service Provider) certification(s) with
training locations throughout the United States, Europe, South Asia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities and our public website at www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to