On Sat, Mar 27, 2010 at 21:21, Mustafa Yadav <[email protected]> wrote: > hi guys, > > From the below logs what do you think the problem is?I did igmp join group > for 225.5.5.5 on one of looopback and enter static rp mapping in all > routers. > > > > Type escape sequence to abort. > Sending 1, 100-byte ICMP Echos to 225.5.5.5, timeout is 2 seconds: > > *Mar 1 14:58:49.704: PIM(0): Check RP 1.1.1.3 into the (*, 225.5.5.5) entry > *Mar 1 14:58:49.708: PIM(0): Send v2 Register to 1.1.1.3 for 1.1.1.1, group > 225.5.5.5 > *Mar 1 14:58:49.716: IP(0): s=1.1.1.1 (Loopback0) d=225.5.5.5 id=30, > ttl=254, prot=1, len=100(100), mroute olist null > *Mar 1 14:58:49.912: PIM(0): Received v2 Register-Stop on FastEthernet0/0 > from 1.1.1.3 > *Mar 1 14:58:49.916: PIM(0): for source 1.1.1.1, group 225.5.5.5 > *Mar 1 14:58:49.920: PIM(0): Clear Registering flag to 1.1.1.3 for > (1.1.1.1/32, 225.5.5.5). > R1#
It's hard to say. You sent register to RP, RP responded with register stop. It could be either building source-tree towards you at this point (not shown in your debugs) or it could have no receivers registered with it. Or it could be something else. You'll need to send some more debugs or relevant diagram/configs. -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert YES! We include 400 hours of REAL rack time with our Blended Learning Solution! Mailto: [email protected] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
