In fact, according to the doccd: ================================================= By using an aggregate policer, you can create a policer that is shared by multiple traffic classes within the same policy map. However, you cannot use the aggregate policer across different policy maps or ports.
================================================= Correct me im wrong, but it looks like the aggregate policer is meant to be applied on multiple traffic classes within the same policy map and applied to a single interface. If this is correct, then the solution is incorrect. Could you please advise on what the correct config should be? Regards Roy On 15 April 2010 12:07, Roy Waterman <[email protected]> wrote: > Hi all > > Would like to query the solution provided in the DSG. > > The question: > > VLAN B should allow no more than 2Meg total throughput traffic. > > Why do we have match class-map class-default for: > > class-map VLANB > match vlan 12 > match class-map class-default <-------------- > > Is class-map VLANB > match vlan 12 > > not enough? > > Please advise. > > Regards > Roy > -- Regards Roy
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
