Sorry about that! You know that is a very good question! I have been messing with that for a little bit and I can not figure that one out! There's got to be a way!
On May 29, 2010, at 5:13 PM, Morgan Charpentier wrote: > Maybe my question was not clear, it was about external EIGRP route. For > internal route I agree with you Adrian. > > But for external it doesn’t seem to work : > In your example if 10.1.1.0/24 is an external eigrp route the distance > command has no effect, it stay with AD170. I labed it on dynamips IOS > 12.4(15)T,. > > > > > -----Message d'origine----- > De : Adrian Brayton [mailto:[email protected]] > Envoyé : samedi 29 mai 2010 19:41 > À : Morgan Charpentier > Cc : [email protected] > Objet : Re: [OSL | CCIE_RS] Setting AD depending on source > > Thats easy... > > access-list 1 permit 10.1.1.0 0.0.0.255 > > router eigrp 1 > > distance 210 "x.x.x.x x.x.x.x. (source)" 1 - The one matching the acl > > So from this source, set a distance of 210 on this route! > > > > On May 29, 2010, at 1:34 PM, Morgan Charpentier wrote: > > > > Hello, > > It seems that setting distance depending on who is sending the update is > acting differently on ospf or eigrp. > > The command : distance XX 10.0.0.2 0.0.0.0 > > In ospf : The command will set a distance of XX for intra-area, inter-area > and external routes. Even if we use ‘distance ospf’ to se different distance > depending on routes. > > In eigrp : The command will set a distance of XX only for internal routes. > The external routes coming from 10.0.0.2 will remain with a default ext > distance of 170 (or the one set with ‘distance eigrp’) > > Quite confusing because in eigrp we can’t play on the external AD on > per-source basis, it need to be changed for all eigrp external routes on the > router. > > Does someone have a way to change external AD per source or per route with > EIGRP ? > > Thanks > Morgan > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
