frame-relay min cir = GURANTEED WHEN IT THROTTLES BACK >>THIS IS THE MINIMUM
YOU WILL GET ALL THE TIME
From: [email protected]
To: [email protected]
Date: Thu, 3 Jun 2010 17:56:32 +0200
Subject: [OSL | CCIE_RS] Vol3_Lab5_Task1.4
Hi all,
I have a little question about Vol3_Lab5_Task1.4.
Is anybody know why "frame-relay min cir" command
is used and not only “frame-relay cir” command ?
thanks
#######################################################################################
This e-mail and any attached files are confidential and may be legally
privileged.
If you are not the addressee, any disclosure, reproduction, copying,
distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac PSF S.A.
immediately
and then delete this e-mail.
Simac PSF S.A. has taken all reasonable precautions to avoid virusses in this
email.
Simac PSF S.A. does not accept liability for damage by virusses, for the
correct and complete
transmission of the information, nor for any delay or interruption of the
transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac PSF S.A. or Simac
PSF S.A. employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac PSF S.A. employees
than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
######################################################################################
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your
inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
