Simionov,
Did you run the commands suggested by Adrian? These may fix you up and get
them working for you
________________________________
From: [email protected]
[mailto:[email protected]] On Behalf Of Adrian Brayton
Sent: Friday, June 11, 2010 9:10 AM
To: Matt Hill
Cc: [email protected]
Subject: Re: [OSL | CCIE_RS] rj45 gbics part number
service unsupported-transciever
no errdisable detect cause gbic-invalid
On Jun 11, 2010, at 12:10 PM, Matt Hill wrote:
There is some command where you can use non-cisco sfps and they work fine.
Can't remember it offhand but if you RTFM you should be able to find it ok.
I have used it previously with a customer and it worked ok. Of course TAC won't
help you if it breaks.
Cheers,
Matt
Sent from my iPhone
On 12/06/2010, at 1:35, Adrian Brayton
<[email protected]<mailto:[email protected]>> wrote:
"The use of third party SFP transceivers with Cisco devices is not supported by
Cisco. Cisco-approved SFP modules have a serial EEPROM that contains the module
serial number, the vendor name and ID, a unique security code, and cyclic
redundancy check (CRC). When an SFP module is inserted in the switch, the
switch software reads the EEPROM to verify the serial number, vendor name and
vendor ID, and recomputes the security code and CRC. If the serial number, the
vendor name or vendor ID, the security code, or CRC is invalid, the software
generates this security error message and places the interface in an
error-disabled state"
On Jun 11, 2010, at 11:26 AM, Adrian Daniel Simionov wrote:
My mistake, is indeed a miniGBIC, but a compatible one was not working. So
please take care when buying one, first to be sure it is working.
--
[https://dl.dropbox.com/u/5428484/green_logo.jpg]
Simionov Daniel Adrian
Network Engineer @ Pacris SRL
Phone: +4 0733 673 147
Email: <mailto:[email protected]> [email protected]<mailto:[email protected]>
[http://dl.dropbox.com/u/5428484/linkedin_logo.jpg]<http://ro.linkedin.com/in/adriansimionov>[http://dl.dropbox.com/u/5428484/gtalk.png]xsimio
[http://dl.dropbox.com/u/5428484/yahoo.png] xsimio
Please don't print this e-mail unless you really need to!
On Fri, Jun 11, 2010 at 6:20 PM, Matt Hill
<<mailto:[email protected]>[email protected]<mailto:[email protected]>> wrote:
and its not a gbic in a 3560, its an SFP.
On 12 June 2010 01:20, Matt Hill
<<mailto:[email protected]>[email protected]<mailto:[email protected]>> wrote:
> GLC-T
>
> Cheers,
> Matt
>
> CCIE #22386
> CCSI #31207
>
> On 12 June 2010 01:17, Di Bias, Steve
> <<mailto:[email protected]>[email protected]<mailto:[email protected]>>
> wrote:
>> I don't think it matters and you shouldn't have to use the "Cisco" brand,
>> generics work just as well at a fraction of the price. If you do want the
>> Cisco you can use this one:
>>
>>
>>
>> Cisco 1000BASE-T SFP
>>
>>
>>
>> <http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml#model2>
>>
>> http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml#model2
>>
>>
>>
>> Or you can use a generic which I use without issue
>>
>>
>>
>> <http://www.newegg.com/Product/Product.aspx?Item=N82E16833516008&Tpk=oem>
>> http://www.newegg.com/Product/Product.aspx?Item=N82E16833516008&Tpk=oem
>>
>>
>>
>> Steve Di Bias
>>
>> Network Engineer - Information Systems
>>
>> Valley Health System - Las Vegas
>>
>> Office - 702- 369-7594
>>
>> Cell - 702-241-1801
>>
>> <mailto:[email protected]>
>> [email protected]<mailto:[email protected]>
>>
>>
>>
>> ________________________________
>>
>> From: <mailto:[email protected]>
>> [email protected]<mailto:[email protected]>
>> [mailto:<mailto:[email protected]>[email protected]<mailto:[email protected]>]
>> On Behalf Of ccie fish
>> Sent: Friday, June 11, 2010 8:09 AM
>> To: <mailto:[email protected]>
>> [email protected]<mailto:[email protected]>
>> Subject: [OSL | CCIE_RS] rj45 gbics part number
>>
>>
>>
>> What is the part # for the rj45 gbic to put into the 3560's?
>>
>> Thanks
>>
>> Cciefish
>>
>>
>> UHS Confidentiality Notice: This e-mail message, including any attachments,
>> is for the sole use of the intended recipient(s) and may contain
>> confidential and privileged information. Any unauthorized review, use,
>> disclosure or distribution of this information is prohibited, and may be
>> punishable by law. If this was sent to you in error, please notify the
>> sender by reply e-mail and destroy all copies of the original message.
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit <http://www.ipexpert.com/> www.ipexpert.com<http://www.ipexpert.com/>
>>
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
<http://www.ipexpert.com/> www.ipexpert.com<http://www.ipexpert.com/>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
<http://www.ipexpert.com/> www.ipexpert.com<http://www.ipexpert.com/>
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
![http://dl.dropbox.com/u/5428484/gtalk.png]xsimio](https://dl.dropbox.com/u/5428484/gtalk.png]xsimio){kind=link}
